Stereo Power Amplifier Professional Series AP2020

Yorkville Sound; Pickering, ON

  • Jahr
  • 1996 ??
  • Kategorie
  • NF-(Niederfrequenz-) Verstärker oder -Mixer
  • Radiomuseum.org ID
  • 274628

 Technische Daten

  • Anzahl Transistoren
  • Halbleiter vorhanden.
  • Halbleiter
  • Hauptprinzip
  • NF-Verstärkung
  • Wellenbereiche
  • - ohne
  • Betriebsart / Volt
  • Wechselstromspeisung
  • Lautsprecher
  • - Dieses Modell benötigt externe(n) Lautsprecher.
  • Belastbarkeit / Leistung
  • 1200 W (2650 W max./spitze)
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: Stereo Power Amplifier Professional Series AP2020 - Yorkville Sound; Pickering, ON
  • Form
  • Rack
  • Abmessungen (BHT)
  • 483 x 89 x 439 mm / 19 x 3.5 x 17.3 inch
  • Bemerkung
  • Yorkville Stereo Power Amplifier Professional Series Model AP2020

    Amplifier class H (= Class AB with adaptive voltage on power rails)

    Power output:

    • 2Ω: 2 x 600 W continuous, 2 x 1325 W burst, bridged mode not possible.
    • 4Ω: 2 x 450 W continuous, 2 x 650 W burst, 1 x 1200 W bridged continuous, 1 x 2100 W bridge burst.
    • 8Ω: 2 x 250 W continuous, 2 x 350 W burst,  1 x 1200 W bridged continuous,  1 x 1600 W bridge burst. 

    Frequency response: 20Hz to 20kHz
    Total harmonic distortion: 0.1%
    Damping factor: 450
    Gain: 31 dB
    Input sensitivity: 1.0 V
    Signal to noise ratio: 103dB unweighted
    High Pass Filter 40Hz, 12dB Octave
    Power Consumption: up to max. 1440 Watts
    Finish Baked, Black Painted

  • Nettogewicht
  • 15.9 kg / 35 lb 0.4 oz (35.022 lb)
  • Literaturnachweis
  • - - Manufacturers Literature (Service & Owners Manual)
  • Autor
  • Modellseite von Franz Scharner angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

 Forum