4445A Model 9A variometer tuned
Atwater Kent Mfg. Co.; Philadelphia, USA
- Pays
- Etats-Unis
- Fabricant / Marque
- Atwater Kent Mfg. Co.; Philadelphia, USA
- Année
- 1923
- Catégorie
- Radio - ou tuner d'après la guerre 1939-45
- Radiomuseum.org ID
- 183108
- No. de tubes
- 4
- Principe général
- Récepteur TRF - sans réaction (pas régénératif)
- Circuits accordés
- 2 Circuits MA (AM)
- Gammes d'ondes
- PO uniquement
- Tension / type courant
- Piles (rechargeables ou/et sèches)
- Haut-parleur
- - Ce modèle nécessite des HP externes
- Matière
- Boitier en bois, lampes visibles
- De Radiomuseum.org
- Modèle: 4445A Model 9A [variometer tuned] - Atwater Kent Mfg. Co.;
- Forme
- Formes diverses décrites en notes
- Dimensions (LHP)
- 620 x 220 x 220 mm / 24.4 x 8.7 x 8.7 inch
- Remarques
-
Breadboard. Two dials (primary tuning control knobs).
This was the last version of the variometer tuned Model 9. Battery binding posts were removed and power was carried to the receiver through a cable. The early version 9 used a green T/A unit and battery binding post connections while the later version used the cable and a brown wrinkle paint finish T/A can.
Breadboard consisting of two type 11 tuners, RF-amp, TA 3812 Det./Amp; even regeneration was possible (though not designed for) through plate coupling (with a very good front tube);Antenna connections for long and short antenna on top of the board. Ground connection on the first variometer.
- Poids net
- 5 kg / 11 lb 0.2 oz (11.013 lb)
- Schémathèque (2)
- The Atwater Kent Radios, The AWA Review, 1999 Vol. 12, by Ralph O. Williams, pages 53-57
- Auteur
- Modèle crée par Konrad Birkner † 12.08.2014. Voir les propositions de modification pour les contributeurs supplémentaires.
- D'autres Modèles
-
Vous pourrez trouver sous ce lien 507 modèles d'appareils, 331 avec des images et 332 avec des schémas.
Tous les appareils de Atwater Kent Mfg. Co.; Philadelphia, USA
Collections
Le modèle 4445A fait partie des collections des membres suivants.