Beo 610 Netenhed / Power Pack

Bang & Olufsen (B&O); Struer

Daten
Forum
Bilder
Sammlungen

  • Jahr
  • 1964
  • Kategorie
  • Strom-Versorgung oder Spannungsstabilisator
  • Radiomuseum.org ID
  • 238797
    • Marke: B&O

Klicken Sie auf den Schaltplanausschnitt, um diesen kostenlos als Dokument anzufordern.

 Technische Daten

  • Anzahl Transistoren
  • 3
  • Wellenbereiche
  • - ohne
  • Betriebsart / Volt
  • Wechselstromspeisung / 220 Volt
  • Lautsprecher
  • - - Kein Ausgang für Schallwiedergabe.
  • Material
  • Plastikgehäuse (nicht Bakelit), Thermoplast
  • von Radiomuseum.org
  • Modell: Beo 610 Netenhed / Power Pack - Bang & Olufsen B&O; Struer
  • Form
  • Chassis - Einbaugerät
  • Bemerkung

  • Optional mains adapter to fit into the battery compartment of Beo 610.

    Installation instructions:

    The mains lead is inserted through the bottom hole. The power pack is placed on the studs (23). The contact (25) is removed from the chassis contact and connected to the pins of the power pack, and contact (24) of the mains lead is connected to the pins of the chassis contact. The power pack is then pressed firmly in on the studs so that the hooks can be locked in the slots of the studs (21).
    The mains switch may require some adjustment. This adjustment is carried out by turning the adjustment screw in a clockwise direction if the apparatus will not start and counter-clockwise if it can not be switched off with the main switch (1).
    Warning: When the power pack is installed the main switch must be in outer position until the hooks of the power pack have been locked. In case the receiver is not provided with a power pack, the contact (23) from the battery housing shall be connected to the pins on the chassis.

  • Literaturnachweis
  • -- Original-techn. papers.

 Sammlungen | Museen | Literatur

 Forum