Beo 610 Netenhed / Power Pack

Bang & Olufsen (B&O); Struer

Données
Forum
Images
Collections

  • Année
  • 1964
  • Catégorie
  • Alimentation/stabilisateur de tension ou batterie ou chargeur
  • Radiomuseum.org ID
  • 238797
    • Brand: B&O

Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.

 Spécifications techniques

  • No. de transistors
  • 3
  • Gammes d'ondes
  • - sans
  • Tension / type courant
  • Alimentation Courant Alternatif (CA) / 220 Volt
  • Haut-parleur
  • - - Pas de sortie basse fréquence
  • Matière
  • Plastique moderne (pas de bakélite, ni de catalin)
  • De Radiomuseum.org
  • Modèle: Beo 610 Netenhed / Power Pack - Bang & Olufsen B&O; Struer
  • Forme
  • Chassis (pour intégration dans meuble)
  • Remarques

  • Optional mains adapter to fit into the battery compartment of Beo 610.

    Installation instructions:

    The mains lead is inserted through the bottom hole. The power pack is placed on the studs (23). The contact (25) is removed from the chassis contact and connected to the pins of the power pack, and contact (24) of the mains lead is connected to the pins of the chassis contact. The power pack is then pressed firmly in on the studs so that the hooks can be locked in the slots of the studs (21).
    The mains switch may require some adjustment. This adjustment is carried out by turning the adjustment screw in a clockwise direction if the apparatus will not start and counter-clockwise if it can not be switched off with the main switch (1).
    Warning: When the power pack is installed the main switch must be in outer position until the hooks of the power pack have been locked. In case the receiver is not provided with a power pack, the contact (23) from the battery housing shall be connected to the pins on the chassis.

  • Littérature
  • -- Original-techn. papers.

 Collections | Musées | Littérature

 Forum