FM Stereo Modulator 219A

Boonton Radio Corp.; Boonton, NJ

  • Año
  • 1961
  • Categoría
  • Aparato de medida y servicio (Equipo de laboratorio).
  • Radiomuseum.org ID
  • 247263

Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.

 Especificaciones técnicas

  • Numero de valvulas
  • 18
  • Numero de transistores
  • Principio principal
  • Amplificador de Audio
  • Gama de ondas
  • - no hay
  • Tensión de funcionamiento
  • Red: Corriente alterna (CA, Inglés = AC) / 105-125; 210-250 Volt
  • Altavoz
  • - - No hay salida de sonido.
  • Material
  • Metálico
  • de Radiomuseum.org
  • Modelo: FM Stereo Modulator 219A - Boonton Radio Corp.; Boonton,
  • Forma
  • Sobremesa apaisado (tamaño grande).
  • Ancho, altura, profundidad
  • 16.75 x 5.03125 x 18.375 inch / 425 x 128 x 467 mm
  • Anotaciones
  • The FM Stereo Modulator Type 219A and a suitable FM Signal Generator; viz., BRC Type 202H, will provide the complete composite signal simulating the transmitted information of a commercial FM Stereo broadcast. With the internal audio oscillators in the 219A and the 202H, no other equipment is required. The output of the 219A may also be fed directly into the FM Stereo demodulator of an FM receiver.

    A peak reading metering system, calibrated in "Percent System Deviation", is provided for setting and monitoring the levels of the individual subcarriers.

    The FM Stereo Modulator is completely self-contained and is housed in a single cabinet which may be adapted for standard rack mounting.

    Each tube and diode type listed once only. Price as of 1965.

    This device needs a mains cable with PH-163 connector.

  • Peso neto
  • 35 lb (35 lb 0 oz) / 15.890 kg
  • Precio durante el primer año
  • 975.00 US$
  • Procedencia de los datos
  • -- Original-techn. papers.
  • Mencionado en
  • - - Manufacturers Literature (Boonton Radio, The Notebook; Fall, 1961, Number 30)
  • Documentación / Esquemas (1)
  • - - Manufacturers Literature (Catalog: hp Electronic Test Instruments, 1965, p.210)
  • Autor
  • Modelo creado por un miembro de A. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

Colecciones

El modelo FM Stereo Modulator es parte de las colecciones de los siguientes miembros.

 Forum

Contribuciones en el Foro acerca de este modelo: Boonton Radio Corp.;: FM Stereo Modulator 219A

Hilos: 1 | Mensajes: 3

Does anybody knows this mains plug from the Boonton Stereo Modulator 219A:

I'm looking for a matching mains cable or the socket alone. The pins measure 3.3 mm in thickness, inner dimensions of the plug are 26.5 x 13 mm, outer pin spacing is 16 mm.

Maybe a common connector in the early 1960s, but nowadays [at least in Germany] no longer obtainable.

Thanks for looking,
Bernhard

Bernhard Nagel, 14.Jul.15

Weitere Posts (3) zu diesem Thema.