Triple Current-Measuring shunt Resistor 479651
Everett, Edgcumbe and Co; London
- País
- Gran Bretaña (GB)
- Fabricante / Marca
- Everett, Edgcumbe and Co; London
- Año
- 1938 ??
- Categoría
- Aparato de medida y servicio (Equipo de laboratorio).
- Radiomuseum.org ID
- 356294
- Gama de ondas
- - no hay
- Tensión de funcionamiento
- No necesita alimentación
- Altavoz
- - - No hay salida de sonido.
- Material
- Materiales diversos
- de Radiomuseum.org
- Modelo: Triple Current-Measuring shunt Resistor 479651 - Everett, Edgcumbe and Co;
- Forma
- Formas varias descritas en notas aparte.
- Ancho, altura, profundidad
- 160 x 32.5 x 88 mm / 6.3 x 1.3 x 3.5 inch
- Anotaciones
-
Three shunts for current measurement up to 1.5 A, 15 A and 150 A, mounted on a varnished hardwood base (two layers for the 150 A shunt). The heads of the fixing screws are insulated by a pair of feet made of synthetic material.
The 1.5 A and 15 A shunts accept cables up to 0.25" diameter, while the 150 A shunt accepts up to 0.5" diameter. The tapered holes for the voltmeter cables are designed to accept solid round plugs that taper from 6 mm diameter at the top of the shank to 5 mm diameter near the tip. The shunts were furnished in a wooden carrying case containing an Everett Edgcumbe analogue volt/ammeter with a scale of 0-150 and an FSD of 75 mV.
- Peso neto
- 0.695 kg / 1 lb 8.5 oz (1.531 lb)
- Autor
- Modelo creado por Bruce Taylor. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 4 modelos, 3 con imágenes y 0 con esquemas.
Ir al listado general de Everett, Edgcumbe and Co; London
Colecciones
El modelo Triple Current-Measuring shunt Resistor es parte de las colecciones de los siguientes miembros.