Professional Reel to Reel (mono)

Ferry Sound Industries; Adelaide S.A.

Données
Forum
Images
Collections

  • Année
  • 1956/1957 ?
  • Catégorie
  • Enrégistreur et/ou reproducteur son/video
  • Radiomuseum.org ID
  • 306267

 Spécifications techniques

  • Particularités
  • Magnétophone à bandes
  • Tension / type courant
  • Alimentation Courant Alternatif (CA) / 240 Volt
  • Haut-parleur
  • HP dynamique mais incertain
  • De Radiomuseum.org
  • Modèle: Professional Reel to Reel - Ferry Sound Industries;
  • Dimensions (LHP)
  • 500 x 490 x 250 mm / 19.7 x 19.3 x 9.8 inch
  • Remarques

  • Ferry Professional tape recorder - three heavy duty motors, 19-inch rack and panel mounting. Three speed with a sleeve on the capstan, 15, 7 1/2 and 3 3/4 ips, with-out the sleeve on the capstan 7 1/2, 3 3/4 and 1 7/8 ips. the tone controls worked during record as well as play. The pickup or aux input could be mixed with the microphone input, and the monitor speaker had volume control for monitoring. The amplifier was push-pull, valves, with an output of 7 watts. Jack Ferry never quoted frequency response unless he had to - his comment was "if it sounds good to your ears, buy it". Made in 1956 or 1957. Owned by Dr John Stace and then donated by Mr D. Flint.

    Ellison Pop-Up Museum of Radio & Magnetic Recording. Keith Ellison.

  • Poids net
  • 47 lb (47 lb 0 oz) / 21.338 kg
  • Auteur
  • Modèle crée par Keith Ellison. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

Collections

Le modèle Professional Reel to Reel (mono) fait partie des collections des membres suivants.

Musées

Le modèle Professional Reel to Reel (mono) peut être vu dans les musées suivants.

 Forum