Professional Reel to Reel (mono)
Ferry Sound Industries; Adelaide S.A.
- País
- Australia
- Fabricante / Marca
- Ferry Sound Industries; Adelaide S.A.
- Año
- 1956/1957 ?
- Categoría
- Registrador o reproductor de sonido o visual
- Radiomuseum.org ID
- 306267
- Especialidades
- Grabadora de cinta
- Tensión de funcionamiento
- Red: Corriente alterna (CA, Inglés = AC) / 240 Volt
- Altavoz
- Altavoz dinámico (lo más seguro)
- de Radiomuseum.org
- Modelo: Professional Reel to Reel - Ferry Sound Industries;
- Ancho, altura, profundidad
- 500 x 490 x 250 mm / 19.7 x 19.3 x 9.8 inch
- Anotaciones
-
Ferry Professional tape recorder - three heavy duty motors, 19-inch rack and panel mounting. Three speed with a sleeve on the capstan, 15, 7 1/2 and 3 3/4 ips, with-out the sleeve on the capstan 7 1/2, 3 3/4 and 1 7/8 ips. the tone controls worked during record as well as play. The pickup or aux input could be mixed with the microphone input, and the monitor speaker had volume control for monitoring. The amplifier was push-pull, valves, with an output of 7 watts. Jack Ferry never quoted frequency response unless he had to - his comment was "if it sounds good to your ears, buy it". Made in 1956 or 1957. Owned by Dr John Stace and then donated by Mr D. Flint.
Ellison Pop-Up Museum of Radio & Magnetic Recording. Keith Ellison.
- Peso neto
- 47 lb (47 lb 0 oz) / 21.338 kg
- Autor
- Modelo creado por Keith Ellison. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 22 modelos, 22 con imágenes y 0 con esquemas.
Ir al listado general de Ferry Sound Industries; Adelaide S.A.
Colecciones
El modelo Professional Reel to Reel (mono) es parte de las colecciones de los siguientes miembros.
Museos
El modelo Professional Reel to Reel (mono) se puede ver en los siguientes museos.