Konzertgerät 8040 Stereo CS200MS
Grundig (Radio-Vertrieb, RVF, Radiowerke); Fürth/Bayern
- Country
- Germany
- Manufacturer / Brand
- Grundig (Radio-Vertrieb, RVF, Radiowerke); Fürth/Bayern
- Year
- 1966 ??
- Category
- Broadcast Receiver - or past WW2 Tuner
- Radiomuseum.org ID
- 109137
-
- alternative name: Grundig Portugal || Grundig USA / Lextronix
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Tubes
- 6
- Number of Transistors
- Main principle
- Superheterodyne (common)
- Tuned circuits
- 6 AM circuit(s) 10 FM circuit(s)
- Wave bands
- Broadcast, Long Wave, Short Wave plus FM or UHF.
- Power type and voltage
- Alternating Current supply (AC) / 110; 130; 220; 240 Volt
- Loudspeaker
- - This model requires external speaker(s).
- Power out
- 6 W (unknown quality)
- from Radiomuseum.org
- Model: Konzertgerät 8040 Stereo CS200MS - Grundig Radio-Vertrieb, RVF,
- Shape
- Chassis only or for «building in»
- Dimensions (WHD)
- 530 x 200 x 150 mm / 20.9 x 7.9 x 5.9 inch
- Notes
-
Chassis model for mounting. Stereo-Automatic-Decoder 6 is an option. This Grundig chassis CS200MS for Konzertgerät 8040 st has for instance also been used for Weltfunk 4068 and Rosita Juno Stereo Luxus.
- Literature/Schematics (1)
- -- Original-techn. papers.
- Author
- Model page created by Spiros Tsianakas. See "Data change" for further contributors.
- Other Models
-
Here you find 6212 models, 5442 with images and 4208 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Grundig (Radio-Vertrieb, RVF, Radiowerke); Fürth/Bayern
Collections
The model Konzertgerät 8040 Stereo is part of the collections of the following members.
Forum contributions about this model: Grundig Radio-: Konzertgerät 8040 Stereo CS200MS
Threads: 2 | Posts: 5
Hallo Florian,
ich habe ein Gerät bei mir ohne Gehäuse stehen. Würden Dir ein paar Bilder von der Seilführung helfen. Ich möchte das Seil ungern abnehmen um die exakte Länge zu messen.
Gruß Michael
Michael Mehnert, 25.Jul.07
Hallo an alle Rundfunkfreunde.
Ich habe ein Problem bei der Instandsetzung des genannten Gerätes.Elektrisch ist das Gerät wieder einwandfrei,jedoch bereitet mit das Skalenseil Probleme.Das Auflegen eines neuen Skalenseiles habe ich bei den meisten Geräten aus meiner Sammlung gut hinbekommen,jedoch bereitet mir dieses Probleme,obwohl der Skalenantrieb relativ simpel gestaltet ist.Hat vielleicht jemand eine Skizze oder Explosionszeichnung zu diesem Chassis?Auch für allgemeine Tips wäre ich sehr dankbar.
MfG,
Florian Langer
Florian Langer, 07.Jun.07