• Año
  • 1957
  • Categoría
  • Radio - o Sintonizador pasado WW2
  • Radiomuseum.org ID
  • 148573

Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.

 Especificaciones técnicas

  • Numero de valvulas
  • 4
  • Principio principal
  • Superheterodino en general; ZF/IF 470 kHz; 2 Etapas de AF
  • Número de circuitos sintonía
  • 6 Circuíto(s) AM
  • Gama de ondas
  • OM y OL
  • Tensión de funcionamiento
  • Red / Baterías o pilas / 200-250 / 1.5 & 90 Volt
  • Altavoz
  • Altavoz dinámico (de imán permanente) / Ø 4.5 inch = 11.4 cm
  • Material
  • Cuero/Tela/ Plástico sobre otros materiales
  • de Radiomuseum.org
  • Modelo: 29 - Invicta Radio Ltd.; Cambridge,
  • Forma
  • Portátil > 20 cm (sin la necesidad de una red)
  • Ancho, altura, profundidad
  • 10.5 x 5 x 8 inch / 267 x 127 x 203 mm
  • Anotaciones
  • Attache style radio same chassis as model 28. Similar to Pam models 712 & 716, also Pye model P114BQ.
  • Precio durante el primer año
  • 17.00 GBP
  • Procedencia de los datos
  • -- Schematic
  • Referencia esquema
  • Radio and TV Servicing books (R&TVS) book
  • Mencionado en
  • Attache Radios. By Mark Johnson.
  • Autor
  • Modelo creado por Keith Staines. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

Colecciones

El modelo es parte de las colecciones de los siguientes miembros.

 Forum

Contribuciones en el Foro acerca de este modelo: Invicta Radio Ltd.;: 29

Hilos: 1 | Mensajes: 5

I recently restored an Invicta 29 (A Pye Chassis same as Invicta 28, PAM 712, PAM716 and Pye Jewel Case with PCB version).

The question I asked people was where should the sceen can be?

I have seen both photographs

Pye Jewel case on RMorg

Screen on DAF96 (possibly wrong)
(RMorg Pye Jewel Case 1955)

and also

screen on DL96 (Invicta 29)

Screen on DL96 (probably right)
(Invicta29, also Pye)

Notice the 1955 and 1957 chassis are identical. Also I have seen in various photographs of the similar chassis the screen on DL96 or DAF96.

Well the DAF96 is sensitive and renowned for "Microphony", so I thought also since the RMorg photo showed it, that the DAF96 was correct location.

But I noticed that for a about 1/3rd of the mid range of the volume the Radio would often "squeal", always when "cold" and less so after an hour or two.

So I swapped screen shield (which has a soldered earth wire) to the DL96 output pentode and from cold the problem of "feedback squeal" at certain volume levels is cured.

 

 

Michael Watterson, 04.Oct.11

Weitere Posts (5) zu diesem Thema.