- Produttore / Marca
- Invicta Radio Ltd.; Cambridge, London
- Anno
- 1937 ?
- Categoria
- Radio (o sintonizzatore del dopoguerra WW2)
- Radiomuseum.org ID
- 251260
- Numero di tubi
- 3
- Valvole
- VP2B_Mullard PM2HL PM22A
- Principio generale
- A reazione (con rigenerazione); 2 Stadi BF
- N. di circuiti accordati
- 2 Circuiti Mod. Amp. (AM)
- Gamme d'onda
- Onde medie (OM) e onde lunghe (OL).
- Tensioni di funzionamento
- Batterie (di accumulatori e/o a secco) / 2 & 9 & 60 & 120 or 150 Volt
- Altoparlante
- AP magnetodinamico (magnete permanente e bobina mobile) / Ø 8 inch = 20.3 cm
- Materiali
- Mobile in legno
- Radiomuseum.org
- Modello: FS36 - Invicta Radio Ltd.; Cambridge,
- Forma
- Soprammobile verticale (sviluppato in altezza; no cattedrale, sin decorazioni).
- Dimensioni (LxAxP)
- 345 x 450 x 225 mm / 13.6 x 17.7 x 8.9 inch
- Annotazioni
-
Virtually identical cabinet to Invicta 420 (seems to be same chassis).
Unusually for a battery model there is a scale lamp. V1 is a Hexode with RF gain via g1 bias.
Two aerial sockets (no internal aerial), one has a 200kHz "Droitwich" trap/rejector as well as earth socket.
Lead Acid Accumulator for LT. 2V and at least 20AH (45AH was common)
Grid bais is Winner 9 or similar as it needs more than one bias and must be adjustable, or an HT pack with multiple 1.5V grid bias taps to -9V. (-1 for driver and output valve is -4.5 or -6 120V HT and -7.5 or -9V on -150V HT)
HT is +60V and +120 or +150V (A Portable 32 would provide this and the Grid Bias Taps). A Winner 120 provides 60 & 120 (either older or later version).
- Letteratura / Schemi (1)
- Trader Service Sheet (suppl. of Wireless & El. Trader, etc.) (317 [21st May 1938])
- Autore
- Modello inviato da Michael Watterson. Utilizzare "Proponi modifica" per inviare ulteriori dati.
- Altri modelli
-
In questo link sono elencati 117 modelli, di cui 68 con immagini e 82 con schemi.
Elenco delle radio e altri apparecchi della Invicta Radio Ltd.; Cambridge, London