Bicor 2000
Lowther Manufacturing Co; Kent
- Produttore / Marca
- Lowther Manufacturing Co; Kent
- Anno
- 1990 ??
- Categoria
- Altoparlante, cuffia o auricolare
- Radiomuseum.org ID
- 341007
Bicor 2000 Pamphlet Page 1.
Bicor 2000 Pamphlet Page 2.
- Gamme d'onda
- - senza
- Tensioni di funzionamento
- Alimentazione non richiesta
- Altoparlante
- 2 altoparlanti / Ø 6 inch = 15.2 cm
- Materiali
- Mobile in legno
- Radiomuseum.org
- Modello: Bicor 2000 - Lowther Manufacturing Co; Kent
- Forma
- Console di qualsiasi tipo
- Dimensioni (LxAxP)
- 25 x 82 x 37 inch / 635 x 2083 x 940 mm
- Annotazioni
-
The Bicor 2000 is equipped with two Lowther PM6 “C” type drivers, both of which are coupled to an exponential horn on the diaphragm side. To ensure a clear, differentiated, and deep bass reproduction, it is necessary to use the corners of the room for bass amplification. The loudspeaker is placed with its back (horn opening) near the corner and directed diagonally into the room with its longitudinal axis. The rear driver also radiates the mid-high range indirectly into the respective corner of the room.
As with any "direct-reflecting" loudspeaker system, the placement is crucial for the sound quality to be achieved, but once the optimal positioning has been found, the listener is compensated by an extremely spacious reproduction, which is difficult to surpass, especially with large-scale sound events.
Specifications
Frequency Range: 40 to 20,000 Hz ±3 dB Power Handling: 100 Watts Impedance: Acceptable for any Hi-Fi Amplifier Sensitivity: 96 dB at 1 metre, 1 watt, 1 kHz
- Bibliografia
- - - Manufacturers Literature (Bicor 2000 Pamphlet)
- Autore
- Modello inviato da Gary Cowans. Utilizzare "Proponi modifica" per inviare ulteriori dati.
- Altri modelli
-
In questo link sono elencati 56 modelli, di cui 51 con immagini e 2 con schemi.
Elenco delle radio e altri apparecchi della Lowther Manufacturing Co; Kent