Bicor 2000

Lowther Manufacturing Co; Kent

Datos
Foro
Imágenes
Colecciones

  • Año
  • 1990 ??
  • Categoría
  • Altavoz, cascos o auricular
  • Radiomuseum.org ID
  • 341007

 Especificaciones técnicas

  • Gama de ondas
  • - no hay
  • Tensión de funcionamiento
  • No necesita alimentación
  • Altavoz
  • 2 Altavoces / Ø 6 inch = 15.2 cm
  • Material
  • Madera
  • de Radiomuseum.org
  • Modelo: Bicor 2000 - Lowther Manufacturing Co; Kent
  • Forma
  • Consola en general
  • Ancho, altura, profundidad
  • 25 x 82 x 37 inch / 635 x 2083 x 940 mm
  • Anotaciones

  • The Bicor 2000 is equipped with two Lowther PM6 “C” type drivers, both of which are coupled to an exponential horn on the diaphragm side. To ensure a clear, differentiated, and deep bass reproduction, it is necessary to use the corners of the room for bass amplification. The loudspeaker is placed with its back (horn opening) near the corner and directed diagonally into the room with its longitudinal axis. The rear driver also radiates the mid-high range indirectly into the respective corner of the room.

    As with any "direct-reflecting" loudspeaker system, the placement is crucial for the sound quality to be achieved, but once the optimal positioning has been found, the listener is compensated by an extremely spacious reproduction, which is difficult to surpass, especially with large-scale sound events.

    Specifications

    Frequency Range: 40 to 20,000 Hz ±3 dB
    Power Handling: 100 Watts
    Impedance: Acceptable for any Hi-Fi Amplifier
    Sensitivity: 96 dB at 1 metre, 1 watt, 1 kHz


     

  • Mencionado en
  • - - Manufacturers Literature (Bicor 2000 Pamphlet)
  • Autor
  • Modelo creado por Gary Cowans. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

 Forum