• Paese
• Gran Bretagna (Regno Unito)

• Produttore / Marca
• Marshall (Brand), Marshall, J & T, (Musical Instruments) Ltd.; Hanwell & Bletchley

• Anno
• 1993 ?

• Categoria
• Amplificatore audio o mixer audio

• Radiomuseum.org ID
• 347342

Clicca sulla miniatura dello schema per richiederlo come documento gratuito.

• Numero di tubi
• 12

• Valvole
• ECC81 or 12AT7 ECC81 or 12AT7 ECC81 or 12AT7 ECC81 or 12AT7 5881 or EL34 5881 or EL34 5881 or EL34 5881 or EL34 5881 or EL34 5881 or EL34 5881 or EL34

• Numero di transistor
• A semiconduttori.

• Semiconduttori

• Principio generale
• Amplificatore audio

• Gamme d'onda
• - senza

• Particolarità
• Amplificatore per chitarra

• Tensioni di funzionamento
• Alimentazione a corrente alternata (CA) / 50 or 60 Hz, 115 or 230 Volt

• Altoparlante
• - Questo apparecchio richiede altoparlante/i esterno/i.

• Potenza d'uscita
• 200 W (indistorta)

• Materiali
• Mobile di metallo

• Radiomuseum.org
• Modello: Dual Monoblock Amplifier 9200 - Marshall Brand, Marshall, J &

• Forma
• Boatanchor (pesante apparecchio militare o commerciale, > 20 kg)

• Dimensioni (LxAxP)
• 482.6 x 133.5 x 331 mm / 19 x 5.3 x 13 inch

• Annotazioni

• The Marshall 9200 and 9100 were valve power amplifiers introduced by Marshall in 1993 as part of their rack technology line.

  These amplifiers were designed as dual monoblocs, offering a unique stereo configuration in a single unit.

  Key Features

  • Dual Monobloc Design: Both models featured a dual monobloc configuration, which was considered a notable feature at the time
  • Stereo Operation: The amplifiers were designed for stereo use, with each channel operating independently
  • Valve Technology: These amplifiers utilised vacuum tube (valve) technology, continuing Marshall's tradition of tube-based amplifiers

  9200 Model​ Specifications

  • Power output: 2 x 100 watts
  • Tube configuration: 8 x 5881 power tubes
  • Dual monobloc design with independent channels
  • Each channel features:
    • Power switch
    • Standby switch
    • Voice toggle switch
    • Presence control
    • Gain control
  • Gold front panel with recessed controls
  • Removable top half with window for valve visibility and access
  • Remote voicing switching capability
  • Output impedance options: 16 ohm or 8 ohm
  • Rack-mountable: 19" 3U x 331mm deep
  • Weight: Approximately 74 pounds (33.6 kg)

  Despite their powerful output and high-quality sound, the substantial weight of these units, particularly the 9200, was noted as a potential drawback.
  Over time, Marshall made changes to these models. At some point after their introduction, they switched from the original tube configuration to using EL34 tubes in a 100/100-watt configuration for the 9200 and a 50/50-watt configuration for the 9100

  The Marshall 9200 and 9100 represented Marshall's foray into high-powered, rack-mountable tube amplifiers, offering guitarists a combination of traditional valve tone and modern stereo capabilities in a professional-grade package.

  Note: Output tube types 5881 or EL34 should not be mixed.

• Peso netto
• 33.6 kg / 74 lb 0.1 oz (74.009 lb)

• Bibliografia
• - - Manufacturers Literature (Marshall Valve Power Amps 9100 & 9200 Handbook Jan 99.)

• Letteratura / Schemi (1)
• - - Manufacturers Literature (Marshall Advertising Pamphlet 1993.)

Marshall 9100 and 9200 Handbook

304 KB

• Documenti su questo modello

• Autore
• Modello inviato da Louis Cenier. Utilizzare "Proponi modifica" per inviare ulteriori dati.

• Altri modelli

• In questo link sono elencati 21 modelli, di cui 20 con immagini e 6 con schemi.
  Elenco delle radio e altri apparecchi della Marshall (Brand), Marshall, J & T, (Musical Instruments) Ltd.; Hanwell & Bletchley