• País
• Gran Bretaña (GB)

• Fabricante / Marca
• Marshall (Brand), Marshall, J & T, (Musical Instruments) Ltd.; Hanwell & Bletchley

• Año
• 1993 ?

• Categoría
• Amplificador de audio o mezclador

• Radiomuseum.org ID
• 347342

Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.

• Numero de valvulas
• 12

• Válvulas
• ECC81 or 12AT7 ECC81 or 12AT7 ECC81 or 12AT7 ECC81 or 12AT7 5881 or EL34 5881 or EL34 5881 or EL34 5881 or EL34 5881 or EL34 5881 or EL34 5881 or EL34

• Numero de transistores
• Hay semiconductores.

• Semiconductores

• Principio principal
• Amplificador de Audio

• Gama de ondas
• - no hay

• Especialidades
• Guitar Amplifier

• Tensión de funcionamiento
• Red: Corriente alterna (CA, Inglés = AC) / 50 or 60 Hz, 115 or 230 Volt

• Altavoz
• - Este modelo usa altavoz exterior (1 o más).

• Potencia de salida
• 200 W (undistorted)

• Material
• Metálico

• de Radiomuseum.org
• Modelo: Dual Monoblock Amplifier 9200 - Marshall Brand, Marshall, J &

• Forma
• Boatanchor (militar, profesional >20 kg).

• Ancho, altura, profundidad
• 482.6 x 133.5 x 331 mm / 19 x 5.3 x 13 inch

• Anotaciones

• The Marshall 9200 and 9100 were valve power amplifiers introduced by Marshall in 1993 as part of their rack technology line.

  These amplifiers were designed as dual monoblocs, offering a unique stereo configuration in a single unit.

  Key Features

  • Dual Monobloc Design: Both models featured a dual monobloc configuration, which was considered a notable feature at the time
  • Stereo Operation: The amplifiers were designed for stereo use, with each channel operating independently
  • Valve Technology: These amplifiers utilised vacuum tube (valve) technology, continuing Marshall's tradition of tube-based amplifiers

  9200 Model​ Specifications

  • Power output: 2 x 100 watts
  • Tube configuration: 8 x 5881 power tubes
  • Dual monobloc design with independent channels
  • Each channel features:
    • Power switch
    • Standby switch
    • Voice toggle switch
    • Presence control
    • Gain control
  • Gold front panel with recessed controls
  • Removable top half with window for valve visibility and access
  • Remote voicing switching capability
  • Output impedance options: 16 ohm or 8 ohm
  • Rack-mountable: 19" 3U x 331mm deep
  • Weight: Approximately 74 pounds (33.6 kg)

  Despite their powerful output and high-quality sound, the substantial weight of these units, particularly the 9200, was noted as a potential drawback.
  Over time, Marshall made changes to these models. At some point after their introduction, they switched from the original tube configuration to using EL34 tubes in a 100/100-watt configuration for the 9200 and a 50/50-watt configuration for the 9100

  The Marshall 9200 and 9100 represented Marshall's foray into high-powered, rack-mountable tube amplifiers, offering guitarists a combination of traditional valve tone and modern stereo capabilities in a professional-grade package.

  Note: Output tube types 5881 or EL34 should not be mixed.

• Peso neto
• 33.6 kg / 74 lb 0.1 oz (74.009 lb)

• Mencionado en
• - - Manufacturers Literature (Marshall Valve Power Amps 9100 & 9200 Handbook Jan 99.)

• Documentación / Esquemas (1)
• - - Manufacturers Literature (Marshall Advertising Pamphlet 1993.)

Marshall 9100 and 9200 Handbook

304 KB

• Documentos sobre este modelo

• Autor
• Modelo creado por Louis Cenier. Ver en "Modificar Ficha" los participantes posteriores.

• Otros modelos

• Donde encontrará 21 modelos, 20 con imágenes y 6 con esquemas.
  Ir al listado general de Marshall (Brand), Marshall, J & T, (Musical Instruments) Ltd.; Hanwell & Bletchley