MS172-W (172W)
Mende - Radio H. Mende & Co. GmbH, Dresden
- Paese
- Germania
- Produttore / Marca
- Mende - Radio H. Mende & Co. GmbH, Dresden
- Anno
- 1941–1943
- Categoria
- Radio (o sintonizzatore del dopoguerra WW2)
- Radiomuseum.org ID
- 3647
-
- Brand: System Günther
Clicca sulla miniatura dello schema per richiederlo come documento gratuito.
- Numero di tubi
- 4
- Principio generale
- Supereterodina (in generale); ZF/IF 468 kHz
- N. di circuiti accordati
- 6 Circuiti Mod. Amp. (AM)
- Gamme d'onda
- Onde medie (OM), lunghe (OL) e corte (OC).
- Tensioni di funzionamento
- Alimentazione a corrente alternata (CA) / 110-240 Volt
- Altoparlante
- AP elettrodinamico (bobina mobile e bobina di eccitazione/di campo)
- Materiali
- Bachelite
- Radiomuseum.org
- Modello: MS172-W - Mende - Radio H. Mende & Co.
- Forma
- Soprammobile con qualsiasi forma (non saputo).
- Dimensioni (LxAxP)
- 420 x 235 x 210 mm / 16.5 x 9.3 x 8.3 inch
- Annotazioni
- Das Typschild des Empfängers zeigt MS172-W, dagegen führen die Service-Unterlagen die Typbezeichnung 172W.
Es handelt sich dabei um dasselbe Modell.
- Peso netto
- 9 kg / 19 lb 13.2 oz (19.824 lb)
- Fonte dei dati
- Radiokatalog Band 1, Ernst Erb
- Riferimenti schemi
- Lange+Schenk+FS-Röhrenbestückung
- Bibliografia
- Funkgeschichte der GFGF (9284)
- Bibliografia immagini
- Das Modell ist im «Radiokatalog» (Erb) abgebildet.
- Altri modelli
-
In questo link sono elencati 316 modelli, di cui 283 con immagini e 206 con schemi.
Elenco delle radio e altri apparecchi della Mende - Radio H. Mende & Co. GmbH, Dresden
Collezioni
Il modello fa parte delle collezioni dei seguenti membri.
Discussioni nel forum su questo modello: Mende - Radio H.: MS172-W
Argomenti: 2 | Articoli: 7
Hallo Sammlerfreunde,
ich möchte mal wieder auf einen Fehler im Schaltplan hinweisen. Die Gegenkopplung von der ECL 11 rechts oben im ersten Schaltplan ist falsch gezeichnet. Das betrifft leider auch den Plan im Empfänger Vade-Mecum S.995 . Die beiden anderen Schaltpläne im RM kann ich nicht beurteilen, da ich sie mir aus bekannten Gründen nicht heruntergeladen habe und die Quelle nicht kenne.
Herzliche Grüße
M. Böhme
Mario Böhme, 04.Dec.14
Greetings!
I have one of these Mende 172W radios in which the speaker has been disconnected. I am having trouble understanding the connections to the field coil.
There are 4 connections and four wires going to the field.
In the picture below, I have numbered the connections.
Between 1 and 2, I measure. 3.4 K ohms. Also 3.4 K ohms between points 3 and 4. So it seems that there are 2 windings in the field. There is no connection between the 2 fields.
Between points 5 and 6 measures 600 ohms, so that is the primary of the speaker transformer. No problem there.
Can anyone explain to me why there are these 2 fields and how they should be connected up? The schematic diagram gives a measurement of 1500 Ohms for the field.
Is it that the fields should be connected in parallel?
Sorry, but my German is not quite good enough to explain this problem.
Thanks
Peter
Allegati
- Mende speaker (118 KB)
- Mende speaker 1 (119 KB)
Peter Hughes, 23.May.14