Power Supply LABPAC B601D

Oltronix AB; Vällingby

  • Anno
  • 1978 ?
  • Categoria
  • Strumento da laboratorio
  • Radiomuseum.org ID
  • 247288

Clicca sulla miniatura dello schema per richiederlo come documento gratuito.

 Specifiche tecniche

  • Numero di transistor
  • A semiconduttori.
  • Semiconduttori
  • Gamme d'onda
  • - senza
  • Tensioni di funzionamento
  • Alimentazione a corrente alternata (CA) / 220 Volt
  • Altoparlante
  • - - Nessuna uscita audio.
  • Radiomuseum.org
  • Modello: Power Supply LABPAC B601D - Oltronix AB; Vällingby
  • Dimensioni (LxAxP)
  • 176 x 176 x 255 mm / 6.9 x 6.9 x 10 inch
  • Annotazioni
  • High current, low voltage power supply with DIGITAL SETTING specially for logic circuit systems

    • Output: 0 — 6V at 10A
    • DIGITAL SETTING and readout of the output voltage with an accuracy of ±0.3% by means of a 10-turn precision potentiometer. This is, in many cases, a valid substitute for an extra DVM monitoring the output voltage

    • Adjustable current limit from 0.2 — 10.25A
    • High efficiency despite the low output voltage by the use of a twin choke filter input

    • Low source and load effect, low PARD (ripple and noise)
    • Overvoltage protection, variable from 4 — 12V, active state indicated by LED, ensuring the best possible protection for your logic circuits

    • Two separate meters for simultaneous monitoring of voltage and current
    • Operating mode displayed by LEDs: constant voltage or constant current
    • Mains transformer with overtemperature protection (OTP)

  • Peso netto
  • 6.4 kg / 14 lb 1.6 oz (14.097 lb)
  • Bibliografia
  • -- Original prospect or advert
  • Autore
  • Modello inviato da Pius Steiner. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

 Forum