Twin Power Supply LABPAC B602D

Oltronix AB; Vällingby

  • Anno
  • 1978 ?
  • Categoria
  • Strumento da laboratorio
  • Radiomuseum.org ID
  • 247286

Clicca sulla miniatura dello schema per richiederlo come documento gratuito.

 Specifiche tecniche

  • Numero di transistor
  • A semiconduttori.
  • Semiconduttori
  • Gamme d'onda
  • - senza
  • Tensioni di funzionamento
  • Alimentazione a corrente alternata (CA) / 220 Volt
  • Altoparlante
  • - - Nessuna uscita audio.
  • Materiali
  • Mobile di metallo
  • Radiomuseum.org
  • Modello: Twin Power Supply LABPAC B602D - Oltronix AB; Vällingby
  • Forma
  • Soprammobile con qualsiasi forma (non saputo).
  • Dimensioni (LxAxP)
  • 176 x 176 x 255 mm / 6.9 x 6.9 x 10 inch
  • Annotazioni
  • Twin voltage power supply with DIGITAL SETTING

    output 1: 0- 60 V at 0.7 A
    output 2: 0 - 30 V at 1.4 A

    • The output voltages are fully independent and separated from each other. The isolation voltage among them and against the instrument case is ± 500V DC and may be applied for continuous operation

    • DIGITAL SETTING and readout of the output voltages with an accuracy of ±0.3% by means of a 10-turn precision potentiometer. This, in many cases, is
    a valid substitute for an extra DVM measuring the output voltage

    • Adjustable current limits from 5% to 105% of the nominal current
    • Low source and load effect, low PARD (ripple and noise)
    • Short circuit protected
    • Overvoltage protection limits the max. output voltage of the 0 - 6 V range to 7V. Its operation is displayed by a LED

    • Switchable volt /ampere-meters
    • Operating mode indicated by LED's: constant voltage or constant current
    • Mains transformer with overtemperature protection (OTP)
     

  • Peso netto
  • 5.3 kg / 11 lb 10.8 oz (11.674 lb)
  • Bibliografia
  • -- Original prospect or advert
  • Autore
  • Modello inviato da Pius Steiner. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

 Forum