Palec 2" Cathode Ray Oscillograph CJ
Paton Electrical Pty. Ltd.(Palec); Sydney NSW
- País
- Australia
- Fabricante / Marca
- Paton Electrical Pty. Ltd.(Palec); Sydney NSW
- Año
- 1938
- Categoría
- Aparato de medida y servicio (Equipo de laboratorio).
- Radiomuseum.org ID
- 316596
- Gama de ondas
- - no hay
- Tensión de funcionamiento
- Red: Corriente alterna (CA, Inglés = AC) / 200-250 Volt
- Material
- Metálico
- de Radiomuseum.org
- Modelo: Palec 2" Cathode Ray Oscillograph CJ - Paton Electrical Pty. Ltd.
- Forma
- Sobremesa alto de forma simple.
- Ancho, altura, profundidad
- 8.5 x 9.5 x 12 inch / 216 x 241 x 305 mm
- Anotaciones
-
Audio Frequency, 2” Cathode Ray Oscillograph
SCREEN:
Diameter of surface 2 Inches (Type 902). 2 ¾” screen 30/- extra. 2.SWEEP CIRCUIT:
Employs a special Linear Sweep Oscillator to cover a range from 30 to 30,000 cycles. Synchronisation can be selected from either the Y plate, 50 cycles, or from an external source.CONTROLLABLE AMPLIFIERS:
Can be put in on both the X and Y plates. The Y plate amplifier (normally used) is designed to have a high gain and to be flat over the audio range.Price plus tax.
CONTROLS:
Are all placed conveniently on the front panel and include, in addition to those outlined above, Vertical and Horizontal Shifts, Focus and Intensity.
- Precio durante el primer año
- 21.00 AUS £
- Mencionado en
- Wireless Weekly (Australia) (Wireless Weekly Dec 16, 1938, Page 28.)
- Autor
- Modelo creado por Gary Cowans. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 49 modelos, 38 con imágenes y 3 con esquemas.
Ir al listado general de Paton Electrical Pty. Ltd.(Palec); Sydney NSW