Palec 2" Cathode Ray Oscillograph CJ
Paton Electrical Pty. Ltd.(Palec); Sydney NSW
- Pays
- Australie
- Fabricant / Marque
- Paton Electrical Pty. Ltd.(Palec); Sydney NSW
- Année
- 1938
- Catégorie
- Appareils de mesure et de dépannage (matériel de labo)
- Radiomuseum.org ID
- 316596
- Gammes d'ondes
- - sans
- Tension / type courant
- Alimentation Courant Alternatif (CA) / 200-250 Volt
- Matière
- Boitier métallique
- De Radiomuseum.org
- Modèle: Palec 2" Cathode Ray Oscillograph CJ - Paton Electrical Pty. Ltd.
- Forme
- Modèle de table vertical (pas forme catédrale)
- Dimensions (LHP)
- 8.5 x 9.5 x 12 inch / 216 x 241 x 305 mm
- Remarques
-
Audio Frequency, 2” Cathode Ray Oscillograph
SCREEN:
Diameter of surface 2 Inches (Type 902). 2 ¾” screen 30/- extra. 2.SWEEP CIRCUIT:
Employs a special Linear Sweep Oscillator to cover a range from 30 to 30,000 cycles. Synchronisation can be selected from either the Y plate, 50 cycles, or from an external source.CONTROLLABLE AMPLIFIERS:
Can be put in on both the X and Y plates. The Y plate amplifier (normally used) is designed to have a high gain and to be flat over the audio range.Price plus tax.
CONTROLS:
Are all placed conveniently on the front panel and include, in addition to those outlined above, Vertical and Horizontal Shifts, Focus and Intensity.
- Prix de mise sur le marché
- 21.00 AUS £
- Littérature
- Wireless Weekly (Australia) (Wireless Weekly Dec 16, 1938, Page 28.)
- Auteur
- Modèle crée par Gary Cowans. Voir les propositions de modification pour les contributeurs supplémentaires.
- D'autres Modèles
-
Vous pourrez trouver sous ce lien 49 modèles d'appareils, 38 avec des images et 3 avec des schémas.
Tous les appareils de Paton Electrical Pty. Ltd.(Palec); Sydney NSW