Palec 2" Cathode Ray Oscillograph CJ
Paton Electrical Pty. Ltd.(Palec); Sydney NSW
- Land
- Australien
- Hersteller / Marke
- Paton Electrical Pty. Ltd.(Palec); Sydney NSW
- Jahr
- 1938
- Kategorie
- Service- oder Labor-Ausrüstung
- Radiomuseum.org ID
- 316596
- Wellenbereiche
- - ohne
- Betriebsart / Volt
- Wechselstromspeisung / 200-250 Volt
- Material
- Metallausführung
- von Radiomuseum.org
- Modell: Palec 2" Cathode Ray Oscillograph CJ - Paton Electrical Pty. Ltd.
- Form
- Tischgerät, Hochformat (höher als quadratisch, schlicht, keine Kathedrale).
- Abmessungen (BHT)
- 8.5 x 9.5 x 12 inch / 216 x 241 x 305 mm
- Bemerkung
-
Audio Frequency, 2” Cathode Ray Oscillograph
SCREEN:
Diameter of surface 2 Inches (Type 902). 2 ¾” screen 30/- extra. 2.SWEEP CIRCUIT:
Employs a special Linear Sweep Oscillator to cover a range from 30 to 30,000 cycles. Synchronisation can be selected from either the Y plate, 50 cycles, or from an external source.CONTROLLABLE AMPLIFIERS:
Can be put in on both the X and Y plates. The Y plate amplifier (normally used) is designed to have a high gain and to be flat over the audio range.Price plus tax.
CONTROLS:
Are all placed conveniently on the front panel and include, in addition to those outlined above, Vertical and Horizontal Shifts, Focus and Intensity.
- Originalpreis
- 21.00 AUS £
- Literaturnachweis
- Wireless Weekly (Australia) (Wireless Weekly Dec 16, 1938, Page 28.)
- Autor
- Modellseite von Gary Cowans angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.
- Weitere Modelle
-
Hier finden Sie 49 Modelle, davon 38 mit Bildern und 3 mit Schaltbildern.
Alle gelisteten Radios usw. von Paton Electrical Pty. Ltd.(Palec); Sydney NSW