AM-FM Messender SMUV 301.0120.52 + SMUV 301.0120.55
Rohde & Schwarz, PTE; München
- País
- Alemania
- Fabricante / Marca
- Rohde & Schwarz, PTE; München
- Año
- 1977 ??
- Categoría
- Aparato de medida y servicio (Equipo de laboratorio).
- Radiomuseum.org ID
- 120461
-
- alternative name: Messgerätebau Memmingen || Physikalisch-Technisches Entwicklungslabor Dr. Rohde & Dr. Schwarz
- Numero de transistores
- Hay semiconductores.
- Semiconductores
- Tensión de funcionamiento
- Red: Corriente alterna (CA, Inglés = AC) / 115:125;220;235 Volt
- de Radiomuseum.org
- Modelo: AM-FM Messender SMUV 301.0120.52 + SMUV 301.0120.55 - Rohde & Schwarz, PTE; München
- Forma
- Sobremesa de cualquier forma, detalles no conocidos.
- Ancho, altura, profundidad
- 492 x 205 x 514 mm / 19.4 x 8.1 x 20.2 inch
- Anotaciones
- AM-FM Messender 10 KHz - 130 MHz in 10 Bereichen. HF-Ausgangsspannung 0,05 µV-0,5 V an 50 Ohm.
Frequenzanzeige 7stellig. Auflösung 100 Hz,10 Hz,1 Hz.
Betriebsarten: Amplituden-und Frequenzmodulation auch gleichzeitig (intern oder extern).
Amplitudenmodulation: AM Modulationgrad bis 98%. Modulationsfrequenzbereich 30 Hz - 20 KHz.
Frequenzmodulation: Frequenzhub 0,01-40 MHz: einstellbar bis 50 KHz Hub. 40-130 MHz/10,0 - 11,5 MHz einstellbar bis 100 KHz Hub. Optionen unter anderen "Wobbeloszillator" mit Wobbelzusatz SMLU-Z.
- Peso neto
- 22 kg / 48 lb 7.3 oz (48.458 lb)
- Procedencia de los datos
- -- Original prospect or advert
- Mencionado en
- -- Original-techn. papers.
- Autor
- Modelo creado por Rudolf Osterkamp. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 550 modelos, 506 con imágenes y 253 con esquemas.
Ir al listado general de Rohde & Schwarz, PTE; München
Colecciones
El modelo AM-FM Messender es parte de las colecciones de los siguientes miembros.
Contribuciones en el Foro acerca de este modelo: Rohde & Schwarz, PTE: AM-FM Messender SMUV 301.0120.52 + SMUV 301.0120.55
Hilos: 1 | Mensajes: 1
Very Similar to the lower speced SMLV I own.
Good classic signal generator but mine has suffered problems with loss of output and widespred capacitor failure. Be particually aware of the tantalum red capacitors inside the RF cage. One caught fire burning the board. Most of the larger electrolytics in the unit had either gone open or were leaking electrolyte.
Would love to hear from anyoune who owns this or the SMLH model.
Simon Spiers, 23.May.15