Solid State Stereo Amplifier AU-101

Sansui Electric Co., Ltd.; Tokyo

  • Anno
  • 1973/1974
  • Categoria
  • Amplificatore audio o mixer audio
  • Radiomuseum.org ID
  • 81247

Clicca sulla miniatura dello schema per richiederlo come documento gratuito.

 Specifiche tecniche

  • Numero di transistor
  • 18
  • Semiconduttori
  • Principio generale
  • Amplificatore audio
  • Particolarità
  • Hi-Fi equipment
  • Tensioni di funzionamento
  • Alimentazione a corrente alternata (CA) / 110; 117; 220; 240 Volt
  • Altoparlante
  • - Questo apparecchio richiede altoparlante/i esterno/i.
  • Potenza d'uscita
  • 30 W (36 W max.)
  • Materiali
  • Vari materiali
  • Radiomuseum.org
  • Modello: Solid State Stereo Amplifier AU-101 - Sansui Electric Co., Ltd.;
  • Forma
  • Apparecchio per ripiani a scaffale (come i componibili HiFi).
  • Dimensioni (LxAxP)
  • 407 x 115 x 278 mm / 16 x 4.5 x 10.9 inch
  • Annotazioni
  • A hi-fi stereo integrated amplifier housed in a metal case with wooden side panels with continuous power output of 2 x 15 watts into 8 ohms or 2 x 18 watts into 4 ohms. With rotary Power on/off switch, rotary Bass, Treble, Balance and Volume controls, rotary Selector switch (Mic, Phono, Aux), on/off switches for Speakers and Loudness, Tape Monitor switch (Source, Playback) with DIN socket, and jacks for Headphones and Microphone. On the back, Ground terminal, RCA phono sockets for input Phono and Aux, for Tape Rec and Play, terminals for 1 pair of loudspeakers and 1 switched and 1 unswitched AC outlet.

    Specification  
    POWER OUTPUT  
    MUSIC POWER (IHF) 50W into 4Ω, 44W into 8Ω
    CONTINUOUSE POWER 18+18W into 4Ω load
    15+15W into 8Ω load
    THD < 0.8% at rated output
    POWER BANDWIDTH (IHF) 25-40,000Hz
    FREQUENCY RESPONSE 20-60,000Hz ±2dB
    CHANNEL SEPARATION
     (at 1,000Hz, rated output)
    PHONO: > 45dB,  AUX: > 45dB
    HUM AND NOISE (IHF) PHONO: > 65dB,  AUX: > 75dB
    INPUT SENSITIVITY (at 1,000Hz)  
     PHONO
     MIC (MONO)
     AUX
     TAPE MON (pin)
     TAPE RECORDER (DIN)
    3mV (50kΩ)
    4mV (50kΩ)
    200mV (50kΩ)
    200mV (50kΩ)
    200mV (50kΩ)
    RECORDING OUTPUT  
     TAPE REC (pin)
     TAPE RECORDER (DIN)
    200mV
    30mV
    LOAD IMPEDANCE 4 to 16Ω
    EQUALIZER PHONO RIAA NF type, MIC: flat NF type

    Semiconductors: Transistors; 18, Diodes; 4
    Power Requirements: 100, 117, 220, 240V AC 50/60Hz with voltage selector
    Power Consumption:  30W (rated)

  • Peso netto
  • 5.9 kg / 12 lb 15.9 oz (12.996 lb)
  • Letteratura / Schemi (1)
  • - - Manufacturers Literature (Operating Instructions and Service Manual Sansui AU-101)
  • Autore
  • Modello inviato da Peter Böhm. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

Collezioni

Il modello Solid State Stereo Amplifier fa parte delle collezioni dei seguenti membri.

 Forum