• Año
  • 1962
  • Categoría
  • Amplificador de audio o mezclador
  • Radiomuseum.org ID
  • 206635

 Especificaciones técnicas

  • Numero de valvulas
  • 5
  • Principio principal
  • Amplificador de Audio
  • Gama de ondas
  • - no hay
  • Tensión de funcionamiento
  • Red: Corriente alterna (CA, Inglés = AC) / 105-125 Volt
  • Altavoz
  • - Este modelo usa altavoz exterior (1 o más).
  • Potencia de salida
  • 100 W (unknown quality)
  • Material
  • Metálico con lámparas a la vista.
  • de Radiomuseum.org
  • Modelo: Carillon Amplifier 6-228 - Schulmerich Electronics Inc;
  • Forma
  • Boatanchor (militar, profesional >20 kg).
  • Ancho, altura, profundidad
  • 18 x 8 x 8.5 inch / 457 x 203 x 216 mm
  • Anotaciones
  • The Schulmerich Model 6-228 is a monolithic audio amplifier not designed to have daily user-operated controls, and would normally be mounted in the bottom of an electronic carillon after a preamplifier. The unit has two top-of-chassis-mounted RCA audio input jacks and a rear Amphenol connector for audio input from a preamplifier. There are two chassis connectors labeled "Input Transformer" and "Tel. line Out" that have no below-chassis connecting wiring and no above-chassis devices plugged into them. The unit has Plate Balance controls adjusting voltage on the output tube (KT88) screens, a well-hidden overall gain control and a rear-accessible "hum" control that sets the ground point on an AC supply feed from the main power transformer to the external preamplifier. The unit draws 250 watts of mains power, has six solid-state diodes in the B+ power supply.
  • Peso neto
  • 29 lb (29 lb 0 oz) / 13.166 kg
  • Autor
  • Modelo creado por Hank Kaczmarski. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

Colecciones

El modelo Carillon Amplifier es parte de las colecciones de los siguientes miembros.

 Forum