Dual channel high speed recorder TR 722
Techni-Rite Electronics Inc.; Warwick, Rhode Island (USA)
- Pays
- Etats-Unis
- Fabricant / Marque
- Techni-Rite Electronics Inc.; Warwick, Rhode Island (USA)
- Année
- 1950 ??
- Catégorie
- Appareils de mesure et de dépannage (matériel de labo)
- Radiomuseum.org ID
- 262834
- Gammes d'ondes
- - sans
- Tension / type courant
- Alimentation Courant Alternatif (CA) / 110 Volt
- Haut-parleur
- - - Pas de sortie basse fréquence
- Matière
- Boitier métallique
- De Radiomuseum.org
- Modèle: Dual channel high speed recorder TR 722 - Techni-Rite Electronics Inc.;
- Forme
- Modèle de table générique
- Dimensions (LHP)
- 10.12 x 4.75 x 15.5 inch / 257 x 121 x 394 mm
- Remarques
-
The introduction from the Operating and service manual.
The TR722 is a completely self-contained two channel recorder, designed to record out to 125 cps. It writes by means of the time-proven Pressure-Thermal method which no inks or fluids, as it employs rugged, heated writing styli and heat sensitive chart paper.
The TR722 is light and rugged. It has been designed an built to withstad heavy, continuous use, and emplois te highest quality components obtainable.
With its 4 electrically-selected chart speeds from 1 to 100 mm/sec.,the TR722 lends itself to applications such as telephone relay testing, pulse-command networks, telemetry readout, medical recording and many other aplications when used with Techni-Rite or other commercially available Preamplifiers, including Strain Gage Applications, acceleration, and many other parameters
Specifications from the Operating and service manual.
Number of Channels 2
Frequency Response DC to 125 cps
Rise time 5 milliseconds,, 10% to 90% of full scale
Voltage Sensitivity 10 millivolts per chart division
Current Sensitivity 10 microamperes per chart division
Input configuration Single-ended and floating
Voltage input impedance 500 K ohms
Current input impedance 1000 ohms
Stability Less than1/3 chart line per 8 hours
Gain control Continuous, 20:1 range
Attenuator Nine position, 500:1 range
Position control Possitions stylus to any point on the chart
Trace width control Automatic with chart speed or manual
Linearity Within 0.5 chart divisions
- Poids net
- 17.5 kg / 38 lb 8.7 oz (38.546 lb)
- Schémathèque (1)
- -- Original-techn. papers.
- Auteur
- Modèle crée par Joeri Frenay. Voir les propositions de modification pour les contributeurs supplémentaires.
- D'autres Modèles
-
Vous pourrez trouver sous ce lien 1 modèles d'appareils, 1 avec des images et 0 avec des schémas.
Tous les appareils de Techni-Rite Electronics Inc.; Warwick, Rhode Island (USA)
Collections
Le modèle Dual channel high speed recorder fait partie des collections des membres suivants.