Dual channel high speed recorder TR 722

Techni-Rite Electronics Inc.; Warwick, Rhode Island (USA)

  • Año
  • 1950 ??
  • Categoría
  • Aparato de medida y servicio (Equipo de laboratorio).
  • Radiomuseum.org ID
  • 262834

 Especificaciones técnicas

  • Gama de ondas
  • - no hay
  • Tensión de funcionamiento
  • Red: Corriente alterna (CA, Inglés = AC) / 110 Volt
  • Altavoz
  • - - No hay salida de sonido.
  • Material
  • Metálico
  • de Radiomuseum.org
  • Modelo: Dual channel high speed recorder TR 722 - Techni-Rite Electronics Inc.;
  • Forma
  • Sobremesa de cualquier forma, detalles no conocidos.
  • Ancho, altura, profundidad
  • 10.12 x 4.75 x 15.5 inch / 257 x 121 x 394 mm
  • Anotaciones
  • The introduction from the Operating and service manual.

    The TR722 is a completely self-contained two channel recorder, designed to record out to 125 cps. It writes by means of the time-proven Pressure-Thermal method which no inks or fluids, as it employs rugged, heated writing styli and heat sensitive chart paper.

    The TR722 is light and rugged. It has been designed an built to withstad heavy, continuous use, and emplois te highest quality components obtainable.

    With its 4 electrically-selected chart speeds from 1 to 100 mm/sec.,the TR722 lends itself to applications such as telephone relay testing, pulse-command networks, telemetry readout, medical recording and many other aplications when used with Techni-Rite or other commercially available Preamplifiers, including Strain Gage Applications, acceleration, and many other parameters 

    Specifications from the Operating and service manual.

    Number of Channels                       2
    Frequency Response                      DC to 125 cps
    Rise time                                       5 milliseconds,, 10% to 90% of full scale
    Voltage Sensitivity                         10 millivolts per chart division
    Current Sensitivity                          10 microamperes per chart division
    Input configuration                          Single-ended and floating
    Voltage input impedance                 500 K ohms
    Current input impedance                 1000 ohms
    Stability                                         Less than1/3 chart line per 8 hours
    Gain control                                   Continuous, 20:1 range
    Attenuator                                     Nine position, 500:1 range
    Position control                              Possitions stylus to any point on the chart
    Trace width control                         Automatic with chart speed or manual
    Linearity                                        Within 0.5 chart divisions

  • Peso neto
  • 17.5 kg / 38 lb 8.7 oz (38.546 lb)
  • Documentación / Esquemas (1)
  • -- Original-techn. papers.
  • Autor
  • Modelo creado por Joeri Frenay. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

Colecciones

El modelo Dual channel high speed recorder es parte de las colecciones de los siguientes miembros.

 Forum