Plug-In Test Unit (Calibration Fixture) 84 (067-0523-00)

Tektronix; Portland, OR

  • Jahr
  • 1964 ?
  • Kategorie
  • Service- oder Labor-Ausrüstung
  • Radiomuseum.org ID
  • 206379

Klicken Sie auf den Schaltplanausschnitt, um diesen kostenlos als Dokument anzufordern.

 Technische Daten

  • Anzahl Röhren
  • 2
  • Anzahl Transistoren
  • Halbleiter vorhanden.
  • Halbleiter
  • Wellenbereiche
  • - ohne
  • Betriebsart / Volt
  • Externes Speisegerät / Netzgerät / Hauptgerät
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: Plug-In Test Unit 84 - Tektronix; Portland, OR
  • Form
  • Chassis - Einbaugerät
  • Abmessungen (BHT)
  • 5.875 x 7 x 10 inch / 149 x 178 x 254 mm
  • Bemerkung
  • The Tektronix Model 84 Plug-In Test Unit is used with Tektronix 580-series oscilloscopes, providing a reference signal for setting the oscilloscope vertical amplifier gain, a fast voltage step for adjusting oscilloscope vertical amplifier transient response, and a load bank which loads the oscilloscope power supplies over their full current range. It allows a check of the DC balance of the oscilloscope vertical amplifier and may also be fed external signals which might be used in calibration procedures.
    The Type 84 underwent a model number change occurring at serial number 794; previously it was designated 067-0523-00 Calibration Fixture. Both unit designations are electrically identical.
  • Nettogewicht
  • 4.25 lb (4 lb 4 oz) / 1.930 kg
  • Datenherkunft
  • - - Data from my own collection
  • Autor
  • Modellseite von Hank Kaczmarski angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

Sammlungen

Das Modell Plug-In Test Unit (Calibration Fixture) befindet sich in den Sammlungen folgender Mitglieder.

 Forum