Plug-In Test Unit (Calibration Fixture) 84 (067-0523-00)

Tektronix; Portland, OR

  • Année
  • 1964 ?
  • Catégorie
  • Appareils de mesure et de dépannage (matériel de labo)
  • Radiomuseum.org ID
  • 206379

Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.

 Spécifications techniques

  • No. de tubes
  • 2
  • No. de transistors
  • Semi-conducteurs présents
  • Semi-conducteurs
  • Gammes d'ondes
  • - sans
  • Tension / type courant
  • Alimentation externe ou alimentation principale
  • Matière
  • Boitier métallique
  • De Radiomuseum.org
  • Modèle: Plug-In Test Unit 84 - Tektronix; Portland, OR
  • Forme
  • Chassis (pour intégration dans meuble)
  • Dimensions (LHP)
  • 5.875 x 7 x 10 inch / 149 x 178 x 254 mm
  • Remarques
  • The Tektronix Model 84 Plug-In Test Unit is used with Tektronix 580-series oscilloscopes, providing a reference signal for setting the oscilloscope vertical amplifier gain, a fast voltage step for adjusting oscilloscope vertical amplifier transient response, and a load bank which loads the oscilloscope power supplies over their full current range. It allows a check of the DC balance of the oscilloscope vertical amplifier and may also be fed external signals which might be used in calibration procedures.
    The Type 84 underwent a model number change occurring at serial number 794; previously it was designated 067-0523-00 Calibration Fixture. Both unit designations are electrically identical.
  • Poids net
  • 4.25 lb (4 lb 4 oz) / 1.930 kg
  • Source
  • - - Data from my own collection
  • Auteur
  • Modèle crée par Hank Kaczmarski. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

Collections

Le modèle Plug-In Test Unit (Calibration Fixture) fait partie des collections des membres suivants.

 Forum