Stereo Integrated Amplifier KA-1030
Kenwood, Trio-Kenwood Inc.; Komagane
- Land
- Japan
- Hersteller / Marke
- Kenwood, Trio-Kenwood Inc.; Komagane
- Jahr
- 1991–1994
- Kategorie
- NF-(Niederfrequenz-) Verstärker oder -Mixer
- Radiomuseum.org ID
- 242556
-
- anderer Name: Trio Corp.
- Marke: Jennen
Klicken Sie auf den Schaltplanausschnitt, um diesen kostenlos als Dokument anzufordern.
- Anzahl Transistoren
- Halbleiter vorhanden.
- Halbleiter
- Hauptprinzip
- NF-Verstärkung
- Wellenbereiche
- - ohne
- Spezialitäten
- Hi-Fi-Gerät
- Betriebsart / Volt
- Wechselstromspeisung / 230; 240 Volt
- Lautsprecher
- - Dieses Modell benötigt externe(n) Lautsprecher.
- Belastbarkeit / Leistung
- 130 W (140 W max./spitze)
- Material
- Metallausführung
- von Radiomuseum.org
- Modell: Stereo Integrated Amplifier KA-1030 - Kenwood, Trio-Kenwood Inc.;
- Form
- Regalgerät wie HiFi-Komponente für Bücherwand.
- Abmessungen (BHT)
- 440 x 137 x 280 mm / 17.3 x 5.4 x 11 inch
- Bemerkung
-
A hi-fi stereo integrated amplifier with continuous power output of 65 watts per channel into 8 ohms, housed in a black metal case. With rotary Volume, Bass, Treble and Balance controls, push button switches for Tape 1 monitor, Tape 2, Tuner, Phono and CD, on/off push button switches for Power, Loudness, Muting, CD Direct, Speakers A and B and a jack for headphones. On the back, a ground terminal, RCA phono sockets for input Phono, Tuner and CD/Aux, for input/output two tape recorders and terminals for two pairs of loudspeakers (A and B).
Specification Rated Power Output
Max. continuous output power
(IEC) from 63Hz-12,500Hz
0.7% THD into 8Ω
(DIN) 1,000Hz into 8Ω
into 4Ω
65W + 65W
65W + 65W
70W + 70WTotal Harmonic Distortion
(20Hz-20,000Hz)0.03% at rated power into 8Ω Intermodulation Distortion
(60Hz:7kHz = 4:1)0.03% at rated power into 8Ω Damping factor 40 (50Hz into 8Ω) Frequency Response 10Hz-60kHz +0dB,-3dB Input Sensitivity/Impedance
Phono
Tuner/Tape /CD
2.5mV/47kΩ
150mV/27kΩS/N Ratio (IHF-A)
Phono
Tuner/Tape/CD
75dB for 2.5mV input
100dB for 150mV inputPhono Max. Input Level 100mV, THD 0.05% at 1kHz Output Level/Impedance
Tape REC (Pin)150mV/330Ω Phono Frequency Response RIAA standard curve ±0.5dB (20Hz-20,000Hz) Versions/Power requirements
230V AC 50Hz
240V AC 50HzPower Consumption: 150 Watts
Assembled in Singapore
- Nettogewicht
- 6.7 kg / 14 lb 12.1 oz (14.758 lb)
- Literaturnachweis
- -- Original prospect or advert (1991-92 and 1994 Kenwood HiFi catalogues)
- Literatur/Schema (1)
- - - Manufacturers Literature (Service manual Kenwood KA-1030 dated 1991-2)
- Autor
- Modellseite von Jacky Parmentier angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.
- Weitere Modelle
-
Hier finden Sie 902 Modelle, davon 836 mit Bildern und 251 mit Schaltbildern.
Alle gelisteten Radios usw. von Kenwood, Trio-Kenwood Inc.; Komagane
Sammlungen
Das Modell Stereo Integrated Amplifier befindet sich in den Sammlungen folgender Mitglieder.