Stereo Integrated Amplifier KA-1030
Kenwood, Trio-Kenwood Inc.; Komagane
- Paese
- Giappone
- Produttore / Marca
- Kenwood, Trio-Kenwood Inc.; Komagane
- Anno
- 1991–1994
- Categoria
- Amplificatore audio o mixer audio
- Radiomuseum.org ID
- 242556
-
- alternative name: Trio Corp.
- Brand: Jennen
Clicca sulla miniatura dello schema per richiederlo come documento gratuito.
- Numero di transistor
- A semiconduttori.
- Semiconduttori
- Principio generale
- Amplificatore audio
- Gamme d'onda
- - senza
- Particolarità
- Hi-Fi equipment
- Tensioni di funzionamento
- Alimentazione a corrente alternata (CA) / 230; 240 Volt
- Altoparlante
- - Questo apparecchio richiede altoparlante/i esterno/i.
- Potenza d'uscita
- 130 W (140 W max.)
- Materiali
- Mobile di metallo
- Radiomuseum.org
- Modello: Stereo Integrated Amplifier KA-1030 - Kenwood, Trio-Kenwood Inc.;
- Forma
- Apparecchio per ripiani a scaffale (come i componibili HiFi).
- Dimensioni (LxAxP)
- 440 x 137 x 280 mm / 17.3 x 5.4 x 11 inch
- Annotazioni
-
A hi-fi stereo integrated amplifier with continuous power output of 65 watts per channel into 8 ohms, housed in a black metal case. With rotary Volume, Bass, Treble and Balance controls, push button switches for Tape 1 monitor, Tape 2, Tuner, Phono and CD, on/off push button switches for Power, Loudness, Muting, CD Direct, Speakers A and B and a jack for headphones. On the back, a ground terminal, RCA phono sockets for input Phono, Tuner and CD/Aux, for input/output two tape recorders and terminals for two pairs of loudspeakers (A and B).
Specification Rated Power Output
Max. continuous output power
(IEC) from 63Hz-12,500Hz
0.7% THD into 8Ω
(DIN) 1,000Hz into 8Ω
into 4Ω
65W + 65W
65W + 65W
70W + 70WTotal Harmonic Distortion
(20Hz-20,000Hz)0.03% at rated power into 8Ω Intermodulation Distortion
(60Hz:7kHz = 4:1)0.03% at rated power into 8Ω Damping factor 40 (50Hz into 8Ω) Frequency Response 10Hz-60kHz +0dB,-3dB Input Sensitivity/Impedance
Phono
Tuner/Tape /CD
2.5mV/47kΩ
150mV/27kΩS/N Ratio (IHF-A)
Phono
Tuner/Tape/CD
75dB for 2.5mV input
100dB for 150mV inputPhono Max. Input Level 100mV, THD 0.05% at 1kHz Output Level/Impedance
Tape REC (Pin)150mV/330Ω Phono Frequency Response RIAA standard curve ±0.5dB (20Hz-20,000Hz) Versions/Power requirements
230V AC 50Hz
240V AC 50HzPower Consumption: 150 Watts
Assembled in Singapore
- Peso netto
- 6.7 kg / 14 lb 12.1 oz (14.758 lb)
- Bibliografia
- -- Original prospect or advert (1991-92 and 1994 Kenwood HiFi catalogues)
- Letteratura / Schemi (1)
- - - Manufacturers Literature (Service manual Kenwood KA-1030 dated 1991-2)
- Autore
- Modello inviato da Jacky Parmentier. Utilizzare "Proponi modifica" per inviare ulteriori dati.
- Altri modelli
-
In questo link sono elencati 902 modelli, di cui 836 con immagini e 251 con schemi.
Elenco delle radio e altri apparecchi della Kenwood, Trio-Kenwood Inc.; Komagane
Collezioni
Il modello Stereo Integrated Amplifier fa parte delle collezioni dei seguenti membri.