• Anno
  • 1979/1980
  • Categoria
  • Ricevitore/trasmettitore amatoriale TRX (o ricetrasmettitore)
  • Radiomuseum.org ID
  • 234886
    • alternative name: Trio Corp.
    • Brand: Jennen

 Specifiche tecniche

  • Numero di tubi
  • 3
  • Numero di transistor
  • 104
  • Semiconduttori
  • Principio generale
  • Ricetrasmettitore
  • Gamme d'onda
  • Gamme d'onda nelle note.
  • Tensioni di funzionamento
  • Alimentazione a corrente alternata (CA) / 120 Volt
  • Altoparlante
  • AP magnetodinamico (magnete permanente e bobina mobile) / Ø 7 cm = 2.8 inch
  • Potenza d'uscita
  • 1.5 W (qualità ignota)
  • Materiali
  • Mobile di metallo
  • Radiomuseum.org
  • Modello: TS-820X - Kenwood, Trio-Kenwood Inc.;
  • Forma
  • Soprammobile con qualsiasi forma (non saputo).
  • Dimensioni (LxAxP)
  • 365 x 335 x 160 mm / 14.4 x 13.2 x 6.3 inch
  • Annotazioni
  • Marqué TRIO. Version US du Kenwood TS820S. Pas de commutation 110/220V mais peut être cablé intérieurement en 220 V. Affichage digital à 100Hz prés.

    De 160 à 10 m en 8 gammes. Réception bande 19 m de 15 à 15,5 MHz.

    Filtre CW 250 Hz.

    Marqueur à quartz 25kHz.

  • Peso netto
  • 16 kg / 35 lb 3.9 oz (35.242 lb)
  • Autore
  • Modello inviato da Olivier Palix. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

Collezioni

Il modello fa parte delle collezioni dei seguenti membri.

 Forum

Discussioni nel forum su questo modello: Kenwood, Trio-: TS-820X

Argomenti: 1 | Articoli: 1

I have got this rig at low price for parts.There was no reception and no emission.In fact,2 connectors was misplaced under the IF circuit,it must be 2 free pins in the center referring to the service manual.After this  the receiver became operational but with the same problems I encoutered on my R820.Happily it is possible to remove the cover plate without removing the VFO.I put only deoxyd and the problems was cleared.Now transmitting is operational,but only till the driver as the two 6146B are missing.I am waiting for them at this time.

Olivier Palix, 02.May.13

Weitere Posts (1) zu diesem Thema.