University Sweep & Marker Generator TVR/SM
University / University Graham Instruments Pty. Ltd., Radio Equipment Pty. Ltd.; Sydney
- Country
- Australia
- Manufacturer / Brand
- University / University Graham Instruments Pty. Ltd., Radio Equipment Pty. Ltd.; Sydney
- Year
- 1962 ??
- Category
- Service- or Lab Equipment
- Radiomuseum.org ID
- 359391
- Number of Tubes
- 5
- Valves / Tubes
- Wave bands
- Wave Bands given in the notes.
- Power type and voltage
- Alternating Current supply (AC) / 240 Volt
- Loudspeaker
- - - No sound reproduction output.
- Material
- Metal case
- from Radiomuseum.org
- Model: University Sweep & Marker Generator TVR/SM - University / University Graham
- Shape
- Tablemodel, with any shape - general.
- Dimensions (WHD)
- 13 x 9.5 x 7 inch / 330 x 241 x 178 mm
- Notes
-
The University Sweep & Marker Generator TVR/SM is a testing device designed for signal generation and frequency analysis of television and FM receivers.
This instrument integrates two key components: sweep and marker generators.The sweep generator produces a signal that varies in frequency from 4.5 MHz to 220 MHz, covering all fundamental frequencies. It features an adjustable sweep width, allowing precise control over the analysed frequency range.
The marker generator consists of two distinct markers:
- A crystal-controlled marker fixed at 5.5 MHz, with the option to use external crystals for other frequencies.
- A variable marker that operates from 20 to 60 MHz on fundamentals, with ranges extending up to 240 MHz using harmonics. This marker dial is directly calibrated for ease of use.
The instrument generates an RF signal that sweeps several MHz on either side of a centre frequency, which is selected using the tuning dial and range switch. The tuning ranges are organized as follows:
- Range 1: Covers sound IF bands, including 5.5 and 10.7 MHz.
- Range 2: Encompasses all TV standard and non-standard IF frequencies.
- Range 3: Spans low band channels 1 to 3.
- Range 4: Covers high band channels 4 to 10.
Operation;
A sweep generator is typically connected to a Cathode Ray Oscilloscope in the following manner:
- The RF output of the sweep generator is connected to the input of the circuit under test.
- The detector output of the circuit under test is then connected to the vertical input of the oscilloscope.
- The sweep generator's horizontal output (often a ramp signal or gate signal) is connected to the external horizontal input of the oscilloscope.
- This setup allows the oscilloscope to display the frequency response of the circuit under test as the sweep generator varies its output frequency. The horizontal axis of the oscilloscope display represents frequency, while the vertical axis shows the amplitude response of the circuit
This versatile device is particularly useful for aligning IF stages in televisions and FM receivers.
- Source of data
- - - Manufacturers Literature
- Mentioned in
- - - Manufacturers Literature (University Graham Instruments Pty.,Catalogue c1960)
- Author
- Model page created by Gordon Markwart. See "Data change" for further contributors.
- Other Models
-
Here you find 25 models, 25 with images and 6 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from University / University Graham Instruments Pty. Ltd., Radio Equipment Pty. Ltd.; Sydney
Collections
The model University Sweep & Marker Generator is part of the collections of the following members.