Selektiver Pegelmesser SPM-3
Wandel & Goltermann; Reutlingen
- Paese
- Germania
- Produttore / Marca
- Wandel & Goltermann; Reutlingen
- Anno
- 1966 ?
- Categoria
- Strumento da laboratorio
- Radiomuseum.org ID
- 113593
-
- alternative name: Wago Wandel & Goltermann
Clicca sulla miniatura dello schema per richiederlo come documento gratuito.
- Numero di transistor
- A semiconduttori.
- Semiconduttori
- Gamme d'onda
- Gamme d'onda nelle note.
- Tensioni di funzionamento
- Rete / Batterie di accumulatori (eventualmente anche le batterie) / 220 / 18 Volt
- Altoparlante
- - - Nessuna uscita audio.
- Materiali
- Mobile di metallo
- Radiomuseum.org
- Modello: Selektiver Pegelmesser SPM-3 - Wandel & Goltermann;
- Forma
- Apparecchio portatile > 20 cm (senza la necessità di una rete)
- Dimensioni (LxAxP)
- 340 x 300 x 180 mm / 13.4 x 11.8 x 7.1 inch
- Annotazioni
-
Selektiver Pegelmesser 2-612 kHz und Breitband-Voltmeter. Zum Betrieb des Gerätes mit Batterien, braucht es 3 Stk. 6-V-NC-Zellen Typ DEAC-5-500DKZ. Betriebsspannung 18 V. Die interne Ladespannung ohne Akku ist 25 V.
Misuratore di livello selettivo da 2 a 612 kHz e voltmetro larga banda.Messgeräte wie das SPM-3 wurden nicht selten über einen Zeitraum von 1 bis 2 Jahrzehnten mit nur kleinen Änderungen aber mit der gleichen Typenbezeichnung hergestellt
- Peso netto
- 8 kg / 17 lb 9.9 oz (17.621 lb)
- Bibliografia
- -- Original prospect or advert (Wandel + Goltermann Prospekt 1966)
- Letteratura / Schemi (1)
- -- Original-techn. papers.
- Autore
- Modello inviato da Gilberto Verrini. Utilizzare "Proponi modifica" per inviare ulteriori dati.
- Altri modelli
-
In questo link sono elencati 172 modelli, di cui 133 con immagini e 76 con schemi.
Elenco delle radio e altri apparecchi della Wandel & Goltermann; Reutlingen
Collezioni
Il modello Selektiver Pegelmesser fa parte delle collezioni dei seguenti membri.
Discussioni nel forum su questo modello: Wandel & Goltermann;: Selektiver Pegelmesser SPM-3
Argomenti: 1 | Articoli: 2
I recently aquired an SPM-3 in excellent condition, except it does not work on either selective or wideband. Fuses are OK.
Meter pointer jumps when unit is switced on.
I do have the schematics. I wondered if others have had this issue and what the problem was.
I am thinking the input amplifier 1st transistor??
Not sure where to start.
Don
VA3DDN
Don Dorward, 25.Mar.12