Selektiver Pegelmesser SPM-3
Wandel & Goltermann; Reutlingen
- País
- Alemania
- Fabricante / Marca
- Wandel & Goltermann; Reutlingen
- Año
- 1966 ?
- Categoría
- Aparato de medida y servicio (Equipo de laboratorio).
- Radiomuseum.org ID
- 113593
-
- alternative name: Wago Wandel & Goltermann
Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.
- Numero de transistores
- Hay semiconductores.
- Semiconductores
- Gama de ondas
- Bandas de recepción puestas en notas.
- Tensión de funcionamiento
- Red / Acumuladores (posiblemente también baterias) / 220 / 18 Volt
- Altavoz
- - - No hay salida de sonido.
- Material
- Metálico
- de Radiomuseum.org
- Modelo: Selektiver Pegelmesser SPM-3 - Wandel & Goltermann;
- Forma
- Portátil > 20 cm (sin la necesidad de una red)
- Ancho, altura, profundidad
- 340 x 300 x 180 mm / 13.4 x 11.8 x 7.1 inch
- Anotaciones
-
Selektiver Pegelmesser 2-612 kHz und Breitband-Voltmeter. Zum Betrieb des Gerätes mit Batterien, braucht es 3 Stk. 6-V-NC-Zellen Typ DEAC-5-500DKZ. Betriebsspannung 18 V. Die interne Ladespannung ohne Akku ist 25 V.
Misuratore di livello selettivo da 2 a 612 kHz e voltmetro larga banda.Messgeräte wie das SPM-3 wurden nicht selten über einen Zeitraum von 1 bis 2 Jahrzehnten mit nur kleinen Änderungen aber mit der gleichen Typenbezeichnung hergestellt
- Peso neto
- 8 kg / 17 lb 9.9 oz (17.621 lb)
- Mencionado en
- -- Original prospect or advert (Wandel + Goltermann Prospekt 1966)
- Documentación / Esquemas (1)
- -- Original-techn. papers.
- Autor
- Modelo creado por Gilberto Verrini. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 172 modelos, 133 con imágenes y 76 con esquemas.
Ir al listado general de Wandel & Goltermann; Reutlingen
Colecciones
El modelo Selektiver Pegelmesser es parte de las colecciones de los siguientes miembros.
Contribuciones en el Foro acerca de este modelo: Wandel & Goltermann;: Selektiver Pegelmesser SPM-3
Hilos: 1 | Mensajes: 2
I recently aquired an SPM-3 in excellent condition, except it does not work on either selective or wideband. Fuses are OK.
Meter pointer jumps when unit is switced on.
I do have the schematics. I wondered if others have had this issue and what the problem was.
I am thinking the input amplifier 1st transistor??
Not sure where to start.
Don
VA3DDN
Don Dorward, 25.Mar.12