9S262 9-S-262 Ch=5905
Zenith Radio Corp.; Chicago, IL
- Land
- USA
- Hersteller / Marke
- Zenith Radio Corp.; Chicago, IL
- Jahr
- 1937
- Kategorie
- Rundfunkempfänger (Radio - oder Tuner nach WW2)
- Radiomuseum.org ID
- 68145
-
- anderer Name: Chicago Radio Lab
Copy gen. von John Goller Radio Attic
With courtesy by Craig Delf
With courtesy by Craig Delf back-view
with courtesy by Craig Delf dial-view
Refinished cabint
Klicken Sie auf den Schaltplanausschnitt, um diesen kostenlos als Dokument anzufordern.
- Anzahl Röhren
- 9
- Hauptprinzip
- Super mit HF-Vorstufe; ZF/IF 456 kHz
- Wellenbereiche
- Mittelwelle, Kurzwelle und Tropenband.
- Betriebsart / Volt
- Wechselstromspeisung / 115 Volt
- Lautsprecher
- Dynamischer LS, mit Erregerspule (elektrodynamisch) / Ø 12 inch = 30.5 cm
- Belastbarkeit / Leistung
- 4.5 W (Qualität unbekannt)
- Material
- Gerät mit Holzgehäuse
- von Radiomuseum.org
- Modell: 9S262 9-S-262 Ch=5905 - Zenith Radio Corp.; Chicago,
- Form
- Standgerät: allgemein.
- Abmessungen (BHT)
- 26.9 x 42 x 16.8 inch / 683 x 1067 x 427 mm
- Originalpreis
- 100.00 $
- Datenherkunft extern
- Ernst Erb
- Schaltungsnachweis
- Rider's Perpetual, Volume 8 = 1937 and before
- Literaturnachweis
- Collector's Guide to Antique Radios 4. Edition
- Literatur/Schema (1)
- Zenith Radio The Glory Years 1936-1945
- Literatur/Schema (2)
- Pre-War Consoles
- Weitere Modelle
-
Hier finden Sie 4505 Modelle, davon 4101 mit Bildern und 3631 mit Schaltbildern.
Alle gelisteten Radios usw. von Zenith Radio Corp.; Chicago, IL
Sammlungen
Das Modell 9S262 befindet sich in den Sammlungen folgender Mitglieder.
Forumsbeiträge zum Modell: Zenith Radio Corp.;: 9S262 9-S-262 Ch=5905
Threads: 1 | Posts: 15
Is some one willing to assist me in troubleshooting my Zeinth 9s262, Shutter Dial. My background kind of goes like: About 1963, I took tube radio repair in vocational high school just as transistors came on the scene and the demand for warm bodies for Viet-Nam draft soared. Since I had a rudimentary understanding of radio electronics, the decision was made to use those skillls in selecting my military career path which was of course engine mechanics. That never detered me from my path of radio collecting. Over the last 40 years I have maintained a collection which now numbers 95-100 radios and spring wound phonographs. I decided I would collect while I had the opportunity and as I neared retirement I would begin what I like to call "polishing" my collection. Which, after all of that, brings me to my point. Man, have I ever forgotten what I thought I knew about radio servicing. Most of the time, I'm lucky and find a bad tube or a melted capicator but not this time. I bought two Zenith consoles at a real good price, both in 7 or 8 out of 10 in quality. The 10s470 is great, looks to have been serviced by a Zenith dealer....all Zenith components plays and sounds new. The other is a 9s262 Shutter Dial. Initial tube checks showed the 6F6 Audio tube with extremely low emmision. I replace the 6F6 and now it overheats and will leave a blister if you touch it. Audio is very low no matter where the volume is....selectivity is marginal. A signal at the volume control indicates that the amp is working. If speaker is disconnected the tube won't overheat but will overheat on a known good speaker with the same load. The absolute worst is that someone has been in the set changing capacitors and I'm not sure where to start. Any guidence will be sincerely appreciated
Joe Rose, 25.Nov.08