9S262 9-S-262 Ch=5905
Zenith Radio Corp.; Chicago, IL
- Pays
- Etats-Unis
- Fabricant / Marque
- Zenith Radio Corp.; Chicago, IL
- Année
- 1937
- Catégorie
- Radio - ou tuner d'après la guerre 1939-45
- Radiomuseum.org ID
- 68145
-
- alternative name: Chicago Radio Lab
Copy gen. von John Goller Radio Attic
With courtesy by Craig Delf
With courtesy by Craig Delf back-view
with courtesy by Craig Delf dial-view
Refinished cabint
Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.
- No. de tubes
- 9
- Principe général
- Super hétérodyne avec étage HF; FI/IF 456 kHz
- Gammes d'ondes
- GO, OC et Police (Maritime)
- Tension / type courant
- Alimentation Courant Alternatif (CA) / 115 Volt
- Haut-parleur
- HP dynamique à électro-aimant (électrodynamique) / Ø 12 inch = 30.5 cm
- Puissance de sortie
- 4.5 W (qualité inconnue)
- Matière
- Boitier en bois
- De Radiomuseum.org
- Modèle: 9S262 9-S-262 Ch=5905 - Zenith Radio Corp.; Chicago,
- Forme
- Console de forme générique
- Dimensions (LHP)
- 26.9 x 42 x 16.8 inch / 683 x 1067 x 427 mm
- Prix de mise sur le marché
- 100.00 $
- Source extérieure
- Ernst Erb
- Source du schéma
- Rider's Perpetual, Volume 8 = 1937 and before
- Littérature
- Collector's Guide to Antique Radios 4. Edition
- Schémathèque (1)
- Zenith Radio The Glory Years 1936-1945
- Schémathèque (2)
- Pre-War Consoles
- D'autres Modèles
-
Vous pourrez trouver sous ce lien 4505 modèles d'appareils, 4101 avec des images et 3631 avec des schémas.
Tous les appareils de Zenith Radio Corp.; Chicago, IL
Collections
Le modèle 9S262 fait partie des collections des membres suivants.
Contributions du forum pour ce modèle: Zenith Radio Corp.;: 9S262 9-S-262 Ch=5905
Discussions: 1 | Publications: 15
Is some one willing to assist me in troubleshooting my Zeinth 9s262, Shutter Dial. My background kind of goes like: About 1963, I took tube radio repair in vocational high school just as transistors came on the scene and the demand for warm bodies for Viet-Nam draft soared. Since I had a rudimentary understanding of radio electronics, the decision was made to use those skillls in selecting my military career path which was of course engine mechanics. That never detered me from my path of radio collecting. Over the last 40 years I have maintained a collection which now numbers 95-100 radios and spring wound phonographs. I decided I would collect while I had the opportunity and as I neared retirement I would begin what I like to call "polishing" my collection. Which, after all of that, brings me to my point. Man, have I ever forgotten what I thought I knew about radio servicing. Most of the time, I'm lucky and find a bad tube or a melted capicator but not this time. I bought two Zenith consoles at a real good price, both in 7 or 8 out of 10 in quality. The 10s470 is great, looks to have been serviced by a Zenith dealer....all Zenith components plays and sounds new. The other is a 9s262 Shutter Dial. Initial tube checks showed the 6F6 Audio tube with extremely low emmision. I replace the 6F6 and now it overheats and will leave a blister if you touch it. Audio is very low no matter where the volume is....selectivity is marginal. A signal at the volume control indicates that the amp is working. If speaker is disconnected the tube won't overheat but will overheat on a known good speaker with the same load. The absolute worst is that someone has been in the set changing capacitors and I'm not sure where to start. Any guidence will be sincerely appreciated
Joe Rose, 25.Nov.08