- Pays
- Suède
- Fabricant / Marque
- AGA and Aga-Baltic Radio AB; Sweden
- Année
- 1945
- Catégorie
- Radio - ou tuner d'après la guerre 1939-45
- Radiomuseum.org ID
- 18086
-
- alternative name: AGA-Baltic Radio AB; Stockholm
Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.
- No. de tubes
- 5
- Principe général
- Super hétérodyne (en général); FI/IF 463 kHz
- Circuits accordés
- 6 Circuits MA (AM)
- Gammes d'ondes
- PO, GO et OC
- Tension / type courant
- Alimentation Courant Alternatif (CA) / 110-240 Volt
- Haut-parleur
- HP dynamique à électro-aimant (électrodynamique) / Ø 16 cm = 6.3 inch
- Matière
- Boitier en bois
- De Radiomuseum.org
- Modèle: 1641 - AGA and Aga-Baltic Radio AB;
- Dimensions (LHP)
- 460 x 321 x 235 mm / 18.1 x 12.6 x 9.3 inch
- Remarques
-
Im Schaltplan ist anstatt einer 6SJ8G fälschlicherweise eine 6S8G als Mischrohr eingetragen Das wäre aber eine Triode/Dreifachdiode, als Mischrohr denkbar ungeeignet und auch nicht zum Schaltplan passend.
The model 1641P has a 6 inch permanent magnet dynamic (PDyn) loudspeaker.
- Prix de mise sur le marché
- 490.00 SFR
- Source extérieure
- E. Erb 3-907007-36-0
- Source du schéma
- Die «Thali Schemasammlung» führt das Modell.
- Littérature
- - - Manufacturers Literature (AGA-Baltic service documentation 1945-46)
- D'autres Modèles
-
Vous pourrez trouver sous ce lien 309 modèles d'appareils, 228 avec des images et 208 avec des schémas.
Tous les appareils de AGA and Aga-Baltic Radio AB; Sweden
Contributions du forum pour ce modèle: AGA and Aga-Baltic: 1641
Discussions: 2 | Publications: 9
Hello Radiofriends According to the AGA 1641 schematics, the mixer tube is a 65J8G, not a 6SJ8G. Would this be to some help? regards Lars-G.
Lars-G. Lundelin, 24.Nov.07
Hello!
I have an AGA 1641. And this a very embarassing thing to ask for..
Since this was the first radio I was thinking of cleaning, I made the beginner's MAJOR mistake!
I tried to wipe the dial clean with a moist cloth...
And as YOU all know, and I didn't know, all of the print disappeared.. I shed a few tears, and decided that I wouldn't do any restoration for a while.. ;o)
Well, My question is, with the above mentioned as background: Is there anyone out there, that has the possibility to scan a dial and sell the scanned image to me, so I can make a new one?
I am having thought that I can use a water-decal, you know, they are used on e.g. airplane models, and similar.. You put it in water, and slide in onto the surface, and when dry, it is finished!
I have heard that there are such decal foils available to use with ink-jet printers, and if I could get a scanned image of the dial, I might make a new scale in glass or acrylic plastic..
I think it is best to scan it mirrored, I mean, putting the dial with the text side (inside) downwards, because otherwise there would be a couple of millimetres between the text and the scanner..
Is there anyone that could help me with this?
Thanks for reading this!
Kind regards
/Jörgen Svensson, Sweden
GR: 86kB .GIF replaced by 17kB .JPG
I have an AGA 1641. And this a very embarassing thing to ask for..
Since this was the first radio I was thinking of cleaning, I made the beginner's MAJOR mistake!
I tried to wipe the dial clean with a moist cloth...
And as YOU all know, and I didn't know, all of the print disappeared.. I shed a few tears, and decided that I wouldn't do any restoration for a while.. ;o)
Well, My question is, with the above mentioned as background: Is there anyone out there, that has the possibility to scan a dial and sell the scanned image to me, so I can make a new one?
I am having thought that I can use a water-decal, you know, they are used on e.g. airplane models, and similar.. You put it in water, and slide in onto the surface, and when dry, it is finished!
I have heard that there are such decal foils available to use with ink-jet printers, and if I could get a scanned image of the dial, I might make a new scale in glass or acrylic plastic..
I think it is best to scan it mirrored, I mean, putting the dial with the text side (inside) downwards, because otherwise there would be a couple of millimetres between the text and the scanner..
Is there anyone that could help me with this?
Thanks for reading this!
Kind regards
/Jörgen Svensson, Sweden
GR: 86kB .GIF replaced by 17kB .JPG
Pièces jointes
Jörgen Svensson, 10.Apr.06