1641

AGA and Aga-Baltic Radio AB; Sweden

Datos
Foro
Imágenes
Colecciones

  • Año
  • 1945
  • Categoría
  • Radio - o Sintonizador pasado WW2
  • Radiomuseum.org ID
  • 18086
    • alternative name: AGA-Baltic Radio AB; Stockholm

Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.

 Especificaciones técnicas

  • Numero de valvulas
  • 5
  • Principio principal
  • Superheterodino en general; ZF/IF 463 kHz
  • Número de circuitos sintonía
  • 6 Circuíto(s) AM
  • Gama de ondas
  • OM, OL y OC
  • Tensión de funcionamiento
  • Red: Corriente alterna (CA, Inglés = AC) / 110-240 Volt
  • Altavoz
  • Altavoz electrodinámico (bobina de campo) / Ø 16 cm = 6.3 inch
  • Material
  • Madera
  • de Radiomuseum.org
  • Modelo: 1641 - AGA and Aga-Baltic Radio AB;
  • Ancho, altura, profundidad
  • 460 x 321 x 235 mm / 18.1 x 12.6 x 9.3 inch
  • Anotaciones

  • Im Schaltplan ist anstatt einer 6SJ8G fälschlicherweise eine 6S8G als Mischrohr eingetragen Das wäre aber eine Triode/Dreifachdiode, als Mischrohr denkbar ungeeignet und auch nicht zum Schaltplan passend.

    The model 1641P has a 6 inch permanent magnet dynamic (PDyn) loudspeaker.

  • Precio durante el primer año
  • 490.00 SFR
  • Ext. procedencia de los datos
  • E. Erb 3-907007-36-0
  • Referencia esquema
  • Die «Thali Schemasammlung» führt das Modell.
  • Mencionado en
  • - - Manufacturers Literature (AGA-Baltic service documentation 1945-46)

 Colecciones | Museos | Literatura

Colecciones

El modelo es parte de las colecciones de los siguientes miembros.

 Forum

Contribuciones en el Foro acerca de este modelo: AGA and Aga-Baltic: 1641

Hilos: 2 | Mensajes: 9

Hello Radiofriends According to the AGA 1641 schematics, the mixer tube is a 65J8G, not a 6SJ8G. Would this be to some help? regards Lars-G.

Lars-G. Lundelin, 24.Nov.07

Weitere Posts (6) zu diesem Thema.

Hello!
I have an AGA 1641. And this a very embarassing thing to ask for..
Since this was the first radio I was thinking of cleaning, I made the beginner's MAJOR mistake!
I tried to wipe the dial clean with a moist cloth...
And as YOU all know, and I didn't know, all of the print disappeared.. I shed a few tears, and decided that I wouldn't do any restoration for a while.. ;o)

Well, My question is, with the above mentioned as background: Is there anyone out there, that has the possibility to scan a dial and sell the scanned image to me, so I can make a new one?

I am having thought that I can use a water-decal, you know, they are used on e.g. airplane models, and similar.. You put it in water, and slide in onto the surface, and when dry, it is finished!
I have heard that there are such decal foils available to use with ink-jet printers, and if I could get a scanned image of the dial, I might make a new scale in glass or acrylic plastic..
I think it is best to scan it mirrored, I mean, putting the dial with the text side (inside)  downwards, because otherwise there would be a couple of millimetres between the text and the scanner..

Is there anyone that could help me with this?

Thanks for reading this!
Kind regards
/Jörgen Svensson, Sweden

GR: 86kB .GIF replaced by 17kB .JPG

Anexos

Jörgen Svensson, 10.Apr.06

Weitere Posts (3) zu diesem Thema.