4 Channel Amplifier 1754A

Hewlett-Packard, (HP); Palo Alto, CA

  • Jahr
  • 1964
  • Kategorie
  • Service- oder Labor-Ausrüstung
  • Radiomuseum.org ID
  • 206203

 Technische Daten

  • Anzahl Röhren
  • 6
  • Anzahl Transistoren
  • Halbleiter vorhanden.
  • Halbleiter
  • Wellenbereiche
  • - ohne
  • Betriebsart / Volt
  • Externes Speisegerät / Netzgerät / Hauptgerät
  • Lautsprecher
  • - - Kein Ausgang für Schallwiedergabe.
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: 4 Channel Amplifier 1754A - Hewlett-Packard, HP; Palo Alto
  • Form
  • Chassis - Einbaugerät
  • Abmessungen (BHT)
  • 6 x 7 x 12 inch / 152 x 178 x 305 mm
  • Bemerkung
  • Unit has six 6CW4 Nuvistor tubes in the signal path and numerous transistors in the switching circuits. This unit has nine calibrated switch-selected sensitivity ranges, from 0.05 V/cm to 20 V/cm with an additional vernier adjustment that extends the sensitivity to 50 c/cm. While working in a model 175A oscilloscope with a native frequency response of 50 MHz, this unit has both AC and DC coupled frequency response of only 40 MHz, so even though its introduction date is somewhat after that of the 'scope, it cannot drive the 'scope to its full capabilities.
  • Nettogewicht
  • 7 lb (7 lb 0 oz) / 3.178 kg
  • Originalpreis
  • 595.00 $
  • Autor
  • Modellseite von Hank Kaczmarski angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

Sammlungen

Das Modell 4 Channel Amplifier befindet sich in den Sammlungen folgender Mitglieder.

 Forum