4 Channel Amplifier 1754A

Hewlett-Packard, (HP); Palo Alto, CA

  • Anno
  • 1964
  • Categoria
  • Strumento da laboratorio
  • Radiomuseum.org ID
  • 206203

 Specifiche tecniche

  • Numero di tubi
  • 6
  • Numero di transistor
  • A semiconduttori.
  • Semiconduttori
  • Gamme d'onda
  • - senza
  • Tensioni di funzionamento
  • Fornita mediante altra unità o unità principale.
  • Altoparlante
  • - - Nessuna uscita audio.
  • Materiali
  • Mobile di metallo
  • Radiomuseum.org
  • Modello: 4 Channel Amplifier 1754A - Hewlett-Packard, HP; Palo Alto
  • Forma
  • Chassis o in scatola da montaggio
  • Dimensioni (LxAxP)
  • 6 x 7 x 12 inch / 152 x 178 x 305 mm
  • Annotazioni
  • Unit has six 6CW4 Nuvistor tubes in the signal path and numerous transistors in the switching circuits. This unit has nine calibrated switch-selected sensitivity ranges, from 0.05 V/cm to 20 V/cm with an additional vernier adjustment that extends the sensitivity to 50 c/cm. While working in a model 175A oscilloscope with a native frequency response of 50 MHz, this unit has both AC and DC coupled frequency response of only 40 MHz, so even though its introduction date is somewhat after that of the 'scope, it cannot drive the 'scope to its full capabilities.
  • Peso netto
  • 7 lb (7 lb 0 oz) / 3.178 kg
  • Prezzo nel primo anno
  • 595.00 $
  • Autore
  • Modello inviato da Hank Kaczmarski. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

Collezioni

Il modello 4 Channel Amplifier fa parte delle collezioni dei seguenti membri.

 Forum