4 Channel Amplifier 1754A

Hewlett-Packard, (HP); Palo Alto, CA

  • Année
  • 1964
  • Catégorie
  • Appareils de mesure et de dépannage (matériel de labo)
  • Radiomuseum.org ID
  • 206203

 Spécifications techniques

  • No. de tubes
  • 6
  • Lampes / Tubes
  • 6CW4
  • No. de transistors
  • Semi-conducteurs présents
  • Semi-conducteurs
  • Gammes d'ondes
  • - sans
  • Tension / type courant
  • Alimentation externe ou alimentation principale
  • Haut-parleur
  • - - Pas de sortie basse fréquence
  • Matière
  • Boitier métallique
  • De Radiomuseum.org
  • Modèle: 4 Channel Amplifier 1754A - Hewlett-Packard, HP; Palo Alto
  • Forme
  • Chassis (pour intégration dans meuble)
  • Dimensions (LHP)
  • 6 x 7 x 12 inch / 152 x 178 x 305 mm
  • Remarques
  • Unit has six 6CW4 Nuvistor tubes in the signal path and numerous transistors in the switching circuits. This unit has nine calibrated switch-selected sensitivity ranges, from 0.05 V/cm to 20 V/cm with an additional vernier adjustment that extends the sensitivity to 50 c/cm. While working in a model 175A oscilloscope with a native frequency response of 50 MHz, this unit has both AC and DC coupled frequency response of only 40 MHz, so even though its introduction date is somewhat after that of the 'scope, it cannot drive the 'scope to its full capabilities.
  • Poids net
  • 7 lb (7 lb 0 oz) / 3.178 kg
  • Prix de mise sur le marché
  • 595.00 $
  • Auteur
  • Modèle crée par Hank Kaczmarski. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

Collections

Le modèle 4 Channel Amplifier fait partie des collections des membres suivants.

 Forum