• Pays
• Etats-Unis

• Fabricant / Marque
• Hewlett-Packard, (HP); Palo Alto, CA

• Année
• 1962–1966

• Catégorie
• Appareils de mesure et de dépannage (matériel de labo)

• Radiomuseum.org ID
• 218333

• No. de tubes
• 17

• Lampes / Tubes
• 6DJ8 6BL8 7586 6BC7 6CW5 or EL86 12AU7 5642 5651A 5083-0353 NE-2

• No. de transistors
• 20

• Semi-conducteurs

• Gammes d'ondes
• - sans

• Tension / type courant
• Alimentation Courant Alternatif (CA) / 115; 230 Volt

• Haut-parleur
• - - Pas de sortie basse fréquence

• Matière
• Boitier métallique

• De Radiomuseum.org
• Modèle: Oscilloscope 130C - Hewlett-Packard, HP; Palo Alto

• Forme
• Modèle de table générique

• Dimensions (LHP)
• 480 x 425 x 180 mm / 18.9 x 16.7 x 7.1 inch

• Remarques
• The Hewlett Packard model 130C Oscilloscope is a versatile instrument for laboratory, production line, or industrial process measurements. Horizontal and vertical display sensitivity is 200 microvolts per centimeter and the measurement bandwidth is 500 kc. A sweep magnifier of up to X50 allows expansion of a trace to the equivalent of 500 centimeters for viewing waveform details.
  
  SWEEP GENERATOR
  INTERNAL SWEEP: 21 ranges, 1 µsec/cm to 5 sec/cm, accuracy within +/- 3%.
  Vernier provides oontinuous adjustment between ranges and extends slowest sweep to at least 12.5 sec/cm.
  MAGNIFICATION: X2, X5, X1O, X20, X50 overall sweep accuracy within +/- 5% for sweep rates which do not exceed a maxinwm rate of 0.2 µsec/cm.
  AUTOMATIC TRIGGERING: Base line is displayed in the absence of an input signal.
  Internal: 50 cps to 500 kc signal causing 0.5 cm or more vertical deflection and also from line voltage.
  External: 50 cps to 500 kc, 0.5 volts peak-to peak or more.
  Trigger Slope: Positive or negative slope of external sync signals or internal vertical deflection signals.
  
  VERTICAL AND HORIZONTAL AMPLIFIERS
  BANDWIDTH:
  DC Coupled: DC to 500 kc
  AC Coupled (input): 2 cps to 500 kc.
  AC Coupled (amplifier): 25 cps to 500 kc at 0.2 mV/cm sensitivity.
  Lower cut-off frequency (fco) is reduced as sensitivity is reduced; at 20 mv/cm fco is 0.25 cps. On less sensitive ranges, response extends to DC.
  SENSITIVITY: 0.2 mV/cm to 20 V/cm. 16 ranges in 1,2,5,10 sequence with an attenuator accuracy within +/- 3%. Vernier permits continuous adjustment of sensitivity between ranges and extends mininwm sensitivity to at least 50 V/cm.
  INPUT IMPEDANCE: 1 megohm shunted by 45 pf, constant on all sensitivity ranges.
  
  
  RACK INSTALLATION.
  The Model 130C is shipped from the factory ready for use as a bench instrument. The hardware necessary to rack-mount the instrument is packaged with the instrument.
  90 W power consumption. Tubes listed once per type.

• Poids net
• 14 kg / 30 lb 13.4 oz (30.837 lb)

• Littérature
• - - Manufacturers Literature (Operating & Service Manual 1966)

• Auteur
• Modèle crée par Jean-Pierre Gérard. Voir les propositions de modification pour les contributeurs supplémentaires.

• D'autres Modèles

• Vous pourrez trouver sous ce lien 393 modèles d'appareils, 361 avec des images et 138 avec des schémas.
  Tous les appareils de Hewlett-Packard, (HP); Palo Alto, CA