Bib Recording Tape Splicer 20

Multicore Solders Ltd.; Hemel Hempstead

Daten
Forum
Bilder
Sammlungen

  • Jahr
  • 1957 ??
  • Kategorie
  • Service- oder Labor-Ausrüstung
  • Radiomuseum.org ID
  • 356153

 Technische Daten

  • Wellenbereiche
  • - ohne
  • Betriebsart / Volt
  • Keine Stromversorgung
  • Lautsprecher
  • - - Kein Ausgang für Schallwiedergabe.
  • Material
  • Diverses Material
  • von Radiomuseum.org
  • Modell: Bib Recording Tape Splicer 20 - Multicore Solders Ltd.; Hemel
  • Form
  • Diverse Formen, unter Bemerkung beschrieben.
  • Abmessungen (BHT)
  • 115 x 23 x 41 mm / 4.5 x 0.9 x 1.6 inch
  • Bemerkung

  • The Bib Model 20 Recording Tape Splicer is made of nickel-plated brass, mounted on a non-slip flock-covered plywood base. It could alternatively be removed from the base and mounted directly on a tape deck with 6BA bolts and nuts or self-tapping screws.

    The splicer is intended for 0.25" reel-to-reel tape and can be used for normal diagonal cuts, or for right angle cuts where close editing to within a syllable is required. Supplied with one razor blade.

    The splicer was also supplied as part of a Model 23 Tape Editing Kit that included 12 tape reel and box labels, a dispenser of splicing tape, and a tape marker pencil in a plastic wallet.

    Later, a Bib splicer was also manufactured for the 0.15" wide tape used in cassettes. It only makes right-angle cuts.

  • Nettogewicht
  • 0.099 kg / 0 lb 3.5 oz (0.218 lb)
  • Literaturnachweis
  • - - Manufacturers Literature (Directions for use)
  • Autor
  • Modellseite von Bruce Taylor angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

Sammlungen

Das Modell Bib Recording Tape Splicer befindet sich in den Sammlungen folgender Mitglieder.

 Forum