Bib Recording Tape Splicer 20
Multicore Solders Ltd.; Hemel Hempstead
- País
- Gran Bretaña (GB)
- Fabricante / Marca
- Multicore Solders Ltd.; Hemel Hempstead
- Año
- 1957 ??
- Categoría
- Aparato de medida y servicio (Equipo de laboratorio).
- Radiomuseum.org ID
- 356153
Directions for use.
Tape editing kit.
- Gama de ondas
- - no hay
- Tensión de funcionamiento
- No necesita alimentación
- Altavoz
- - - No hay salida de sonido.
- Material
- Materiales diversos
- de Radiomuseum.org
- Modelo: Bib Recording Tape Splicer 20 - Multicore Solders Ltd.; Hemel
- Forma
- Formas varias descritas en notas aparte.
- Ancho, altura, profundidad
- 115 x 23 x 41 mm / 4.5 x 0.9 x 1.6 inch
- Anotaciones
-
The Bib Model 20 Recording Tape Splicer is made of nickel-plated brass, mounted on a non-slip flock-covered plywood base. It could alternatively be removed from the base and mounted directly on a tape deck with 6BA bolts and nuts or self-tapping screws.
The splicer is intended for 0.25" reel-to-reel tape and can be used for normal diagonal cuts, or for right angle cuts where close editing to within a syllable is required. Supplied with one razor blade.
The splicer was also supplied as part of a Model 23 Tape Editing Kit that included 12 tape reel and box labels, a dispenser of splicing tape, and a tape marker pencil in a plastic wallet.
Later, a Bib splicer was also manufactured for the 0.15" wide tape used in cassettes. It only makes right-angle cuts.
- Peso neto
- 0.099 kg / 0 lb 3.5 oz (0.218 lb)
- Mencionado en
- - - Manufacturers Literature (Directions for use)
- Autor
- Modelo creado por Bruce Taylor. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 1 modelos, 1 con imágenes y 0 con esquemas.
Ir al listado general de Multicore Solders Ltd.; Hemel Hempstead
Colecciones
El modelo Bib Recording Tape Splicer es parte de las colecciones de los siguientes miembros.