Bib Recording Tape Splicer 20

Multicore Solders Ltd.; Hemel Hempstead

  • Anno
  • 1957 ??
  • Categoria
  • Strumento da laboratorio
  • Radiomuseum.org ID
  • 356153

 Specifiche tecniche

  • Gamme d'onda
  • - senza
  • Tensioni di funzionamento
  • Alimentazione non richiesta
  • Altoparlante
  • - - Nessuna uscita audio.
  • Materiali
  • Vari materiali
  • Radiomuseum.org
  • Modello: Bib Recording Tape Splicer 20 - Multicore Solders Ltd.; Hemel
  • Forma
  • Diverse forme (descritte nelle note).
  • Dimensioni (LxAxP)
  • 115 x 23 x 41 mm / 4.5 x 0.9 x 1.6 inch
  • Annotazioni
  • The Bib Model 20 Recording Tape Splicer is made of nickel-plated brass, mounted on a non-slip flock-covered plywood base. It could alternatively be removed from the base and mounted directly on a tape deck with 6BA bolts and nuts or self-tapping screws.

    The splicer is intended for 0.25" reel-to-reel tape and can be used for normal diagonal cuts, or for right angle cuts where close editing to within a syllable is required. Supplied with one razor blade.

    The splicer was also supplied as part of a Model 23 Tape Editing Kit that included 12 tape reel and box labels, a dispenser of splicing tape, and a tape marker pencil in a plastic wallet.

    Later, a Bib splicer was also manufactured for the 0.15" wide tape used in cassettes. It only makes right-angle cuts.

  • Peso netto
  • 0.099 kg / 0 lb 3.5 oz (0.218 lb)
  • Bibliografia
  • - - Manufacturers Literature (Directions for use)
  • Autore
  • Modello inviato da Bruce Taylor. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

Collezioni

Il modello Bib Recording Tape Splicer fa parte delle collezioni dei seguenti membri.

 Forum