• Année
  • 1937
  • Catégorie
  • Radio - ou tuner d'après la guerre 1939-45
  • Radiomuseum.org ID
  • 201107

Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.

 Spécifications techniques

  • No. de tubes
  • 3
  • Principe général
  • Récepteur TRF - par réaction (régénératif); 1 Etage(s) BF
  • Circuits accordés
  • 2 Circuits MA (AM)
  • Gammes d'ondes
  • PO et GO
  • Tension / type courant
  • Piles (rechargeables ou/et sèches) / 2 & 108 Volt
  • Haut-parleur
  • HP dynamique à aimant permanent + bobine mobile
  • Matière
  • Cuir / canvas / plastique mais autre matériel en dessous!
  • De Radiomuseum.org
  • Modèle: 272 - Vidor Ltd.; Erith Kent
  • Forme
  • Portative > 20 cm (sans nécessité secteur)
  • Remarques
  • May also be referred to as CN272, later the "Cat. No." prefix of all Vidor models is reduced to CN.

    Portable battery receiver in a black leatherette suitcase style case with the loudspeaker in the lid. Same chassis as the Burndept 274. Volume is adjusted using the reaction control.

    Batteries: The lead acid 2V  LT is a 16AH Gel type to avoid spills. The grid bias is tapped  on the HT pack (Vidor 17872, tapped at least 1.5, 3, 72 &108V), with GB2 going to 0V (blue), GB1 to 1.5V (yellow), HT- to 3V (black), HT1 to 72V (green) and HT2 to 108V (red), physically the same size as Winner 108 (but not same connections).

    Unusally for a Vidor TRF, both RF valves/Tubes are Hexodes. The output pentode is the later 5 pin version, there is an earlier 4 pin plus side terminal type. Another rare feature for a battery set of this era is the scale lamp separately switched, 2.6V @ 300mA..The frame aerial is in the lid and tuned.

     

  • Auteur
  • Modèle crée par Howard Craven. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

Collections

Le modèle fait partie des collections des membres suivants.

 Forum