• Anno
  • 1937
  • Categoria
  • Radio (o sintonizzatore del dopoguerra WW2)
  • Radiomuseum.org ID
  • 201107

Clicca sulla miniatura dello schema per richiederlo come documento gratuito.

 Specifiche tecniche

  • Numero di tubi
  • 3
  • Principio generale
  • A reazione (con rigenerazione); 1 Stadi BF
  • N. di circuiti accordati
  • 2 Circuiti Mod. Amp. (AM)
  • Gamme d'onda
  • Onde medie (OM) e onde lunghe (OL).
  • Tensioni di funzionamento
  • Batterie (di accumulatori e/o a secco) / 2 & 108 Volt
  • Altoparlante
  • AP magnetodinamico (magnete permanente e bobina mobile)
  • Materiali
  • Pelle / stoffa / plastica ma con altro materiale sottostante
  • Radiomuseum.org
  • Modello: 272 - Vidor Ltd.; Erith Kent
  • Forma
  • Apparecchio portatile > 20 cm (senza la necessità di una rete)
  • Annotazioni
  • May also be referred to as CN272, later the "Cat. No." prefix of all Vidor models is reduced to CN.

    Portable battery receiver in a black leatherette suitcase style case with the loudspeaker in the lid. Same chassis as the Burndept 274. Volume is adjusted using the reaction control.

    Batteries: The lead acid 2V  LT is a 16AH Gel type to avoid spills. The grid bias is tapped  on the HT pack (Vidor 17872, tapped at least 1.5, 3, 72 &108V), with GB2 going to 0V (blue), GB1 to 1.5V (yellow), HT- to 3V (black), HT1 to 72V (green) and HT2 to 108V (red), physically the same size as Winner 108 (but not same connections).

    Unusally for a Vidor TRF, both RF valves/Tubes are Hexodes. The output pentode is the later 5 pin version, there is an earlier 4 pin plus side terminal type. Another rare feature for a battery set of this era is the scale lamp separately switched, 2.6V @ 300mA..The frame aerial is in the lid and tuned.

     

  • Autore
  • Modello inviato da Howard Craven. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

Collezioni

Il modello fa parte delle collezioni dei seguenti membri.

 Forum